XP Turbo build

[SC Carts]

Hey Guys/Gals

Here is a 2008 XP we just took from stock to turbo. Check out the short video of the progress.

HolomisInternational's Channel - YouTube

Thanks for looking

Holomis Staff
Holomis International Home Page
info@holomis.com

 

[pipes]

sweet looking ride.

 

[dabensmiller]

Those running boards are bad a$$

 

[SC Carts]

Those running boards are bad a$$

Thanks, we built a set on our Dragon Turbo build last year and they worked amazing, no snow build up and very strong.

Thanks for the feedback.

 

[neilsleder]

Is that the stock tunnel just modified? It looks good!

 

[farwest]

Looks good, what track is that ?

 

[BOONDOCKINDAWG]

seen a turbo xp etec yesterday in blue lake and it was INTENSE!!!! the sled just ripped!!

 

[SC Carts]

Is that the stock tunnel just modified? It looks good!

Hello thank you for your input, yes it is just the stock tunnel modified with side plates that we built.

Thanks

 

[SC Carts]

Looks good, what track is that ?

Thank you, it's just the stock 154 track, something that will need to be changed from what we are hearing.

Thanks

 

[SC Carts]

seen a turbo xp etec yesterday in blue lake and it was INTENSE!!!! the sled just ripped!!

That's encouraging! This machine ran up really nice on the test stand, will take it out next weekend!

Thanks for looking

 

[rsaint]

Very nice like the running boards BUT do not like the circles takes away from it.

 

[Anvil1010]

It's interesting that you say that. I am the opposite and i like the circles.

 

[SC Carts]

Very nice like the running boards BUT do not like the circles takes away from it.

Thank you very much for your feedback. We looked at all sorts of different options for venting, we found the XP to be the hardest sled to have vents look good on, it may be due to the many different angles of the machine...but there just wasn't a style that we were crazy for. We built this exact same setup on our dragon last year and it worked really well and we felt that the look was still the cleanest out of ay on the market and we know they work really well, so that's how we ended up with this style. Again we certainly appreciate your feed back as we like to hear everyones opinion on our projects.

Thanks

 

[SC Carts]

It's interesting that you say that. I am the opposite and i like the circles.

Thanks, yes we really like them and they work very well.

 

[han solo]

Those aftermarket running boards are likely the best I have seen on the market! Great job, sled has the super clean look. Less is more look to it.

 

[SC Carts]

Those aftermarket running boards are likely the best I have seen on the market! Great job, sled has the super clean look. Less is more look to it.

Thank you that's the look we were going for, just super clean!

 

[SC Carts]

Here's a pic of it on the snow, finally got out to test it this weekend and what a MACHINE!!! Flawless no lag! Best turbo machine I have had.

Here's a super short clip of it just fooling around at low throttle. 2008 ski doo xp Turbo Holomis International - YouTube

Thanks

Holomis Staff
Holomis International Home Page
info@holomis.com

 

[tex78]

so its a carbed 800r powertech then... not a e tech?????????????

how does it work with the carbs ????? it would suck to have to jet a xp on the hill ... bad enough at home...

 

[SC Carts]

so its a carbed 800r powertech then... not a e tech?????????????

how does it work with the carbs ????? it would suck to have to jet a xp on the hill ... bad enough at home...

It is the best running and performing turbo I have had, way easier to tune then my M8 Turbo and way easier to tune then my turbo dragon. It performs better on the bottom end then a stock machine and obviously from there is only gets better. No turbo lag, I ride between 5000-8500 feet and don't have to touch jets.

 

[maxwell]

maybe i missed something. whos kit? turboperformance?