What Did You Do In Ur Garage?

[CatMan16]

Our shop is closing in RD as well.

I took blade off wife's quad and stowed it. Never bothered to take the thick rope off the winch and put on the longer regular winch rope....I doubt the quad will get any out west duties this year. It'll be used to drag a rake around the yard maybe by Saturday, then it'll sit until the blade goes back on in Nov. Boo.

We haven't officially been told they are shutting us down but they announced major restructuring will happen by June.

 

[luvz da mud]

I'm getting a TON of chit done that I have been putting off, in some cases for years.

Im tinkering in the garage for a good 6 hours a day, and love it. Serenity now!

 

[papajake]

blew the water pump in my mazda going to be busy all day saturday and maybe sunday looks like a fun job

 

[doorfx]

Mounted my custom built Honda eu3000is generator mount on the trailer.
The generator is mounted on springs so no vibration in the trailer. Hidden fasteners to stop theft. Insert 2 bolts for travel. Very slick set up.

Exact same machined piece is mounted to the bottom of the generator. The generator rubber feet sit in the holes for transport, and secured with the two bolts that compress the springs.
SBC valve springs lol

 

[SLEDBUNNYRACING]

Was over with my son and daughter in law giving “guidance” (means I do a lot of the hard work).
Work progresses in a day or so.

 

[RXN]

Spent the day in my shop piecing together one of those play house swings set for my daughter.
Picked it up when RONA was shutting the doors

So far the main base is built and dragged out into the yard.
And the swing beam is done.

Install that tomorrow. Then onto the roof and tunnle assembly.

 

[Med1ogre]

Was over with my son and daughter in law giving “guidance” (means I do a lot of the hard work).
Work progresses in a day or so.//uploads.tapatalk-cdn.com/20200429/cabe4bc4307cff8375e2be3dfbdbc086.jpg

I may be missing something.. but i don't think you can put up a sheet of drywall anymore wrong!

 

[Grinder]

Mounted my custom built Honda eu3000is generator mount on the trailer.
The generator is mounted on springs so no vibration in the trailer. Hidden fasteners to stop theft. Insert 2 bolts for travel. Very slick set up.
//uploads.tapatalk-cdn.com/20200429/f13111ea985fc35b25e26f62b3993968.jpg
Exact same machined piece is mounted to the bottom of the generator. The generator rubber feet sit in the holes for transport, and secured with the two bolts that compress the springs.
SBC valve springs lol

Just a fyi thats how i found the exact same genny in the ditch with the bumper brackets still attached to it. It was broken at the long thin bolts mounting bracket to bumper. That genny is too much weight for that set up. Dont want you to see your genny sliding across lanes. Or in my case I will follow you and pick it up. Lol Saskatchewan Chinese pavement takes its toll.
Personally I would weld it on building a stronger support under it. Just make sure to remove poop tube before welding. Or keep it in the truck box. I know its a pain but its alot of money to lose. I found this kit pic and i built my own wheel setup. Was alot easier to move around.

 

[Beer Slayer]

I may be missing something.. but i don't think you can put up a sheet of drywall anymore wrong!

....or is it plywood on ceiling not drywall?

 

[tiger666]

Very nice set up I've always wanted to do something like that,now I just might.

Mounted my custom built Honda eu3000is generator mount on the trailer.
The generator is mounted on springs so no vibration in the trailer. Hidden fasteners to stop theft. Insert 2 bolts for travel. Very slick set up.
//uploads.tapatalk-cdn.com/20200429/f13111ea985fc35b25e26f62b3993968.jpg
Exact same machined piece is mounted to the bottom of the generator. The generator rubber feet sit in the holes for transport, and secured with the two bolts that compress the springs.
SBC valve springs lol

 

[papajake]

plywood doesn't have white edges look backwards to me to might just trying to see if we would notice

 

[doorfx]

Just a fyi thats how i found the exact same genny in the ditch with the bumper brackets still attached to it. It was broken at the long thin bolts mounting bracket to bumper. That genny is too much weight for that set up. Dont want you to see your genny sliding across lanes. Or in my case I will follow you and pick it up. Lol Saskatchewan Chinese pavement takes its toll.
Personally I would weld it on building a stronger support under it. Just make sure to remove poop tube before welding. Or keep it in the truck box. I know its a pain but its alot of money to lose. I found this kit pic and i built my own wheel setup. Was alot easier to move around.
//uploads.tapatalk-cdn.com/20200429/760240513af4f8038ba87faaae8f1046.jpg

Thanks Grinder I will watch it closely.

The guy that built these has had one on his trailer for seven years. This is a very solid mount.
The generator is mounted on springs when you are parked so zero vibration. Two bolts compresses the springs for travel. Pretty slick.

 

[doorfx]

Very nice set up I've always wanted to do something like that,now I just might.

I can hook you up.

 

[Grinder]

Thanks Grinder I will watch it closely.

The guy that built these has had one on his trailer for seven years. This is a very solid mount.
The generator is mounted on springs when you are parked so zero vibration. Two bolts compresses the springs for travel. Pretty slick.
//uploads.tapatalk-cdn.com/20200429/dad1c2f1e53d7c0a5094e208a7c33782.jpg
//uploads.tapatalk-cdn.com/20200429/4f07663cb881cfd01ebb23a3ca7e5337.jpg

Its these bolts and bracket you have to worry about

 

[arff]

Cleaned my sump out on Monday

 

[Bnorth]

I putta in the laydown post

I ridea da laydown post and no like it

So I takea out the laydown post

 

[tex78]

I putta in the laydown post
View attachment 224904
I ridea da laydown post and no like it
View attachment 224905
So I takea out the laydown post
View attachment 224906

Holy fack your bord eh

 

[Bnorth]

Holy fack your bord eh

Sold it already too.

 

[Bnorth]

Put the Elevate kit on.

 

[RXN]

Brought the '58 out of storage. She got some fluids changed today. Wheel bearings will get grease tomorrow.
And maybe new points.