what belt for zx chassis?

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
like maxwell said pulll them apart and clean everything. especially since it was good till you blew the first belt. could be crap stuck in the helix causing lots of issues. ruined my roller secondary cause i looked at it and said ahhh looks good. and kept rippin. now all the rollers are shot and clutch is a paperweight.:(
well actually 1 roller is still ok, but the helix is fugged to as it is all scarred up from all the chit in it.:d
friggen riders:realmad::mad::rant::d
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
ya exactly. and if youve blown belts that automatically means there are peices of belt in both clutches and possibly behind the primary

ya no chit, blown belt costed me , roller secondary, belt, lower crank seal, speedo cable, and both pto side bearings, oh and i had to be towed by beachsled back to his shack:(
all in all close to 400 bucks.
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
last year just after we finally got his running. lol then it was my sleds turn to crap the bed.
racing across the lake burping the throttle between 70-90 mph on the speedo belt didn't like it to much.:d
 

note

Active VIP Member
Joined
Oct 29, 2008
Messages
1,804
Reaction score
0
Location
ST Albert, AB
So I took my secondary into work and it was all gunked out. after I cleaned it all looked good. now its just the primary :rolleyes:
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,097
Reaction score
43,303
Location
Sherwood Park, Alberta, Canada
do you have a roller secondary?

did you replace the 6 helix slider shoes?

thats a must. only last about 1000 miles and if they are worn they will put uneven pressure on the helix and it may bind
 

note

Active VIP Member
Joined
Oct 29, 2008
Messages
1,804
Reaction score
0
Location
ST Albert, AB
do you have a roller secondary?

did you replace the 6 helix slider shoes?

thats a must. only last about 1000 miles and if they are worn they will put uneven pressure on the helix and it may bind

negitive, the boss man says they look good though.
 

Doo800ho

Active VIP Member
Joined
Feb 1, 2009
Messages
289
Reaction score
25
Location
Blackfalds,Alberta
127 i run on my 98 and 2000 and 166 on my 03. I clean my clutches at least once a year if not twice a year. Do as maxwell said a good ol cleaning.
 
Top Bottom