Washing machine go BOOM

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
I decided to look up their warranty and there is only one year. We never buy the extended warranty on stuff like this so I guess we will just go buy another one. Not much else we can do unless we fight them.
 

niner

Active VIP Member
Joined
Mar 14, 2009
Messages
8,683
Reaction score
62,624
Location
lacombe
I think we had the exact same washer in the video. A whirlpool duet. The bearing went on it , and it would shake like a mofo. We had it 6 years. Repair guy came out and said anything over 5 years now a days is considered good. But being a bit cheap and trying to get a little more life out of it, I put it in the shop for my work clothes. Threw in a load and did some yard work. About 5 minutes later that thing was doing the funky chicken like in the video. Was scared for my life!
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
I was just looking around and instead of buying from the Brick again they have the same one at Costco. So we will buy there. They add in an additional one year warranty as well. Plus its cheaper
 

Pinner

Active VIP Member
Joined
Jan 14, 2009
Messages
668
Reaction score
774
Location
B.C.
<snip>

Repair guy came out and said anything over 5 years now a days is considered good.


I was reading on some forum and a repair guy recommended buying the simplest top load washer available. IIRC the thread was about very expensive repairs on nearly new washers, circuit boards going bad etc. Simple machines last 30 years.
 

Murminator

Timber King
Moderator
Joined
May 22, 2007
Messages
5,615
Reaction score
2,498
Location
NE Edmonton
Thats weird we had a 20 year old maytag top loader if something was out of balance it would shut down and a dinger would go off. I would only assume something a lot newer would have the same feature and shut down.
As for appliances last only about 5 years a coworker has a 5 year old kitchen aid fridge and the fridge stopped working but the freezer would work. He called Sears they sent out a repairman told him it was 2 models old and wasn't worth fixing to expensive and told him no one makes anything for 20 years anymore they want people to change them out more often. Didn't sit well with him called an appliance repair shop they came out and it needed a $40 cylinoid to switch the freon over from 1 side to the other and $200 callout and good to go
 

HotShotHarry

Active VIP Member
Joined
Aug 12, 2007
Messages
1,794
Reaction score
1,801
Location
HINTON
My gotta be close to 20 year old top load Maytag also shuts down when it is out of balance. Id buy another one..
 

femme.fatale.

Active VIP Member
Joined
Jun 18, 2009
Messages
2,809
Reaction score
1,049
Location
Bonnyville
In June we picked up a new Samsung top load. Brought it home and couldn't get it past the set up mode. It would violently shake in any spin mode. Read some reviews after and alot of people would set up boat bumpers to protect their walls. The one we got had an obvious flaw so I took it back and got a heavy azz front loader which has been good. Congratulations on getting four years. Thankfully no one got hurt. Give it to Samsung as best you can!

We went with a Samsung front load 2 years ago - With 2 kids, a dog, and 2 adults, we make a lot of laundry. I'm very happy with mine. The only thing I've had to do to it is clean out the filter on the front of it a few times cause it didn't feel like draining. We bought the absolute largest beast of a thing we could - so happy we did, I can wash my king size duvet, the duvet cover, and the sheets all at once!

We measured ours 3 times before we bought it to make sure it would fit in the laundry nook in our laundry room - on paper it fits - in reality the washer and dryer both bubble out in the middle and we had to cut out some drywall! :rolleyes: Oh and completely remove the entire door and casing and all the trim and curse loudly (a lot) when Kevy and I were installing LOL
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,600
Reaction score
56,457
Location
Leduc
Did you remove all your tea cans from pockets before washing.

Boom and cans blow.

Just checking
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Stopped at costco on the way home today and picked up the new machine. Not really looking forward to removing the old one and installing the new one lol. Maybe there will be some tea involved.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,600
Reaction score
56,457
Location
Leduc
Stopped at costco on the way home today and picked up the new machine. Not really looking forward to removing the old one and installing the new one lol. Maybe there will be some tea involved.

I can help 70 percent
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Got the new one in. Got the old one in the back of the truck ready for the dump. The old one was sure a lot more heavy then the new one. Not sure if that is a good thing. Looking at how it is put together there isn't much holding that drum in place. Kinda scary what little is there.
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Yep the wife saw that yesterday and posted on Facebook. Same as ours. Our new one has warning labels all over it
 

TROLLCAT

Active VIP Member
Joined
Nov 23, 2010
Messages
71,635
Reaction score
39,501
Location
Dease Lake BC
BCTV news story even looked like your pic you posted ............. they want your serial # wild one
 

RGM

Active VIP Member
Joined
Nov 1, 2009
Messages
1,773
Reaction score
3,878
Location
Pemberton
BCTV news story even looked like your pic you posted ............. they want your serial # wild one

Saw that to and it did look his pic. Good thing Samsung doesn't make sleds LOL
 
Top Bottom