trailer length requirements

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
i drew out an 18ft box with a 4ft v on the grauge floor and tried to get my machines in it. looks like the smallest i can get away with is 24ft.

My next question is are 3500lbs axles safe for 4 machines and gear and what not? I found an aluminum 24ft but im worried that being so heavy and built kinda on the lite side that i will hurt the unit... Its a snow pro by alcom... anyone have any info on weather they are any good or not?
 

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,896
Reaction score
10,284
Location
Cold Lake, AB
i drew out an 18ft box with a 4ft v on the grauge floor and tried to get my machines in it. looks like the smallest i can get away with is 24ft.

My next question is are 3500lbs axles safe for 4 machines and gear and what not? I found an aluminum 24ft but im worried that being so heavy and built kinda on the lite side that i will hurt the unit... Its a snow pro by alcom... anyone have any info on weather they are any good or not?
3500lb axles should be fine. An all aluminum trailer like that should weigh in under 2500lbs depending on options. Leaves you 4500lbs, so should even be able to haul 4 Yamaha's plus fuel.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
i drew out an 18ft box with a 4ft v on the grauge floor and tried to get my machines in it. looks like the smallest i can get away with is 24ft.

My next question is are 3500lbs axles safe for 4 machines and gear and what not? I found an aluminum 24ft but im worried that being so heavy and built kinda on the lite side that i will hurt the unit... Its a snow pro by alcom... anyone have any info on weather they are any good or not?
I have a snowpro.
Been a good trailer.
No complaints.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
3500lb axles should be fine. An all aluminum trailer like that should weigh in under 2500lbs depending on options. Leaves you 4500lbs, so should even be able to haul 4 Yamaha's plus fuel.

they are saying it weighs in at 2017#'s empty. and its good for 4983#'s of load. I dunno Im just worried about the aluminum? seems i always have to get my sled deck patched up from the welds breaking and i dont wanna be doing that with a trailer

I have a snowpro.
Been a good trailer.
No complaints.

how would your rate its build quality? have you had ANY issues with yours at all?
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
they are saying it weighs in at 2017#'s empty. and its good for 4983#'s of load. I dunno Im just worried about the aluminum? seems i always have to get my sled deck patched up from the welds breaking and i dont wanna be doing that with a trailer



how would your rate its build quality? have you had ANY issues with yours at all?
No honestly is has been flawless.

I have probably 80,000km on this one.
And I have pulled down 100s of km of logging roads.

Just replace the breaks and tire here last season.
Jack piled up, too.

Welds have all been good.

The weight adds up fast in a 4 place. Mine is the car hauler version. I have hauled a ford escape in it.

https://r.tapatalk.com/shareLink/to...5&share_fid=3194&share_type=t&link_source=app

Tow Rig Scale Numbers.

Search for this thread^
 

canuck5

Active VIP Member
Joined
Oct 20, 2008
Messages
868
Reaction score
1,765
Location
Sylvan Lake
^^^ this one has been good my sleds been on it for a lot of those km. I had a legend aluminum that’s 10 years old thing also has been good usual breaks ect.
 

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
No honestly is has been flawless.

I have probably 80,000km on this one.
And I have pulled down 100s of km of logging roads.

Just replace the breaks and tire here last season.
Jack piled up, too.

Welds have all been good.

The weight adds up fast in a 4 place. Mine is the car hauler version. I have hauled a ford escape in it.

https://r.tapatalk.com/shareLink/to...5&share_fid=3194&share_type=t&link_source=app

Tow Rig Scale Numbers.

Search for this thread^


Yea thats kinda what im worried about, one machine is 600lbs fully fueled (rounded up) so 4 is 2400lbs justin in machines. leaves me 2583lbs of load left. im assuming i dont carry that much weight with me in gear bags, extra fuel, food etc. I just wanna be sure i cant damage the unit cause my last trailer somehow had a bend in the frame on the passenger side at the back behind the axles. I dont wanna spend the 25k and have the same thing happen
 

Firefly

Active VIP Member
Joined
Dec 13, 2006
Messages
697
Reaction score
757
Location
Sturgeon County, AB.
Pics are worth a thousand words. Three forwards and two backwards with a 22' straight wall and a 120!! LOL

On a deck over load the first sled through the front ramp door facing the rear door then the next three forward facing sleds then back the last one in. Then you're only dragging one backwards. On a mid deck you can usually back them up pretty easy.
 

Attachments

  • B576975E-35C7-428B-8DB8-2DF13C4F3467.jpeg
    B576975E-35C7-428B-8DB8-2DF13C4F3467.jpeg
    90.7 KB · Views: 366
  • 5DF78C81-C86B-48FE-ADAF-FA95AC7EC875.jpeg
    5DF78C81-C86B-48FE-ADAF-FA95AC7EC875.jpeg
    139.9 KB · Views: 361

mountainsledmania

Active VIP Member
Joined
Dec 28, 2009
Messages
1,187
Reaction score
1,231
Location
sherwoodpark
Pics are worth a thousand words. Three forwards and two backwards with a 22' straight wall and a 120!! LOL

On a deck over load the first sled through the front ramp door facing the rear door then the next three forward facing sleds then back the last one in. Then you're only dragging one backwards. On a mid deck you can usually back them up pretty easy.


so that trailer is a 26 ft?
 

Firefly

Active VIP Member
Joined
Dec 13, 2006
Messages
697
Reaction score
757
Location
Sturgeon County, AB.
That trailer was a 27’, 22’ of straight wall and a 5’ v-nose. The 22’ of straight wall is necessary for five.
 

sledneck__11

Active VIP Member
Joined
Jan 16, 2011
Messages
1,643
Reaction score
5,497
Location
saskatchewan
Used to have a 8.5x30 mission trailer but was hard to fill it on trips so downsized to this 16+4 trailer and we can still squeeze 4x154s in there when we have to without to much trouble

3834E3B9-6B65-4008-A253-EBE49538F0FB.png E35383B2-87DF-4C7B-A3EF-ED784EC96720.png C9D224D8-2907-4C1E-A83C-3C184FC5F738.png
 

sledneck__11

Active VIP Member
Joined
Jan 16, 2011
Messages
1,643
Reaction score
5,497
Location
saskatchewan
Heater for boots or gloves, used to have aluminum one for gloves and boots i will miss that option my old trailer had but this one will do just fine
 

800tundra

Active member
Joined
Mar 10, 2008
Messages
59
Reaction score
110
Location
Dapp Alberta
(Mountainsledmania)So did you end up buying a 8.5 by 20’ foot straight wall with 4’ vee? Total 24’? I mostly haul snowbikes so dont want to go any bigger than needed. I am in same situation and was hoping the 20’ straight wall with vee would squeeze 4 165” without too much shuffling if I need too. Also have a deck on truck so any more could go on that...
 
Last edited:

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,896
Reaction score
10,284
Location
Cold Lake, AB
(Mountainsledmania)So did you end up buying a 8.5 by 20’ foot straight wall with 4’ vee? Total 24’? I mostly haul snowbikes so dont want to go any bigger than needed. I am in same situation and was hoping the 20’ straight wall with vee would squeeze 4 165” without too much shuffling if I need too. Also have a deck on truck so any more could go on that...
Just for comparison sake, i have a 20ft shipping container which measures 8.5x20, and i easily fit 4 long track sleds. The extra 4ft of V i could likely squeeze 5.
 
Top Bottom