Trailer door

Turblue

Active VIP Member
Joined
Sep 15, 2008
Messages
1,360
Reaction score
4,128
Location
Southern Alberta
Looking to reduce the weight of the rear trailer door on my charmac. I removed the terrible checker plate they had for traction. Just tore up from guys running skis over it. It has 5/8” plywood but would like something lighter

any whizzy products out there?
ECAFADCD-E96F-4F04-AB4D-6307CD1878EA.jpg
 

Turblue

Active VIP Member
Joined
Sep 15, 2008
Messages
1,360
Reaction score
4,128
Location
Southern Alberta
No...they have springs at the bottom where the door folds. Thought about adding something like a torsion system or external springs like the royal.
 

Lightningmike

Active VIP Member
Joined
Jan 6, 2012
Messages
26,367
Reaction score
19,099
Location
Lloydminster Sk.
Mine was real heavy also so I got looking and half those springs in the bottom were broken. Put new ones in and made a world of difference.
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
142,058
Reaction score
56,149
Location
Leduc
No...they have springs at the bottom where the door folds. Thought about adding something like a torsion system or external springs like the royal.

I just bought a Royal enclosed car hauler. The rear door is really heavy and hard to open.
 

Turblue

Active VIP Member
Joined
Sep 15, 2008
Messages
1,360
Reaction score
4,128
Location
Southern Alberta
My buddies new charmac I see they ditched the springs and went to torsion cable system. I’ll have to look closely and see if any are broke.

Was thinking the addition of the royal springs might help
 

papajake

Active VIP Member
Joined
Dec 5, 2006
Messages
2,936
Reaction score
5,877
Location
Didsbury, Alberta
Don’t make the door lighter you will regret it after one season the door will not seal in the middle it only takes one heavy sled or sxs and it’s done very hard to straighten back
 

Turblue

Active VIP Member
Joined
Sep 15, 2008
Messages
1,360
Reaction score
4,128
Location
Southern Alberta
Don’t make the door lighter you will regret it after one season the door will not seal in the middle it only takes one heavy sled or sxs and it’s done very hard to straighten back
Forsure. Not changing the frame just the plywood...it’s built 8” centres....so lots of strength there.
 

Canuk

Active VIP Member
Joined
Nov 13, 2008
Messages
444
Reaction score
143
Location
Spruce Grove
One option could be puck board. I buy 4x8 sheets from Home Depot. not expensive and a lot lighter than 5/8 plywood. Looks cleaner too.
 
Top Bottom