0neoldfart
Active VIP Member
Seems like the latest and greatest these days is the 3" track. The purpose of this thread is to point out that they aren't for everyone, and perhaps guide the prospective buyer to the pros and cons. I will start by saying that I have a 3" on a boosted 4 stroke, as well as 2.5" and 2.6" tracks on some modified two stokes. They each have their place...
Pros: traction, great in bottomless snow. A 3" track on an epic powder day has no equal.
Cons: run hotter on trail, essentially you are building a sled that will ONLY be suited for deep powder days. Trail riding a 3" in low snow / hardpack conditions will result in accelerated hyfax wear, and premature track failure due to heat delamination (this can be reduced by scratcher use and keeping your speed down).
- Higher initial cost / replacement cost.
- The 3" tends to "push" when turning, the added traction can actually resist downhill turns and sidehilling (less likely to spin when you are trying to "set" it into the hill).
- slower track speeds.
- additional load on chaincase components and clutches (drag) - far more apparent on a stock sled.
I'm not trying to sway anyone into a decision, only YOU will know what's best for you and your application. I'm only suggesting that there are downsides and one should evaluate what is "best" for your needs. If you only ride good snow in the mountains, maybe a 3" is the ticket. If you like to ride a mix of local and mountain riding and don't have deep pockets, maybe the shorter lugged track is a better choice.
Food for thought.
Pros: traction, great in bottomless snow. A 3" track on an epic powder day has no equal.
Cons: run hotter on trail, essentially you are building a sled that will ONLY be suited for deep powder days. Trail riding a 3" in low snow / hardpack conditions will result in accelerated hyfax wear, and premature track failure due to heat delamination (this can be reduced by scratcher use and keeping your speed down).
- Higher initial cost / replacement cost.
- The 3" tends to "push" when turning, the added traction can actually resist downhill turns and sidehilling (less likely to spin when you are trying to "set" it into the hill).
- slower track speeds.
- additional load on chaincase components and clutches (drag) - far more apparent on a stock sled.
I'm not trying to sway anyone into a decision, only YOU will know what's best for you and your application. I'm only suggesting that there are downsides and one should evaluate what is "best" for your needs. If you only ride good snow in the mountains, maybe a 3" is the ticket. If you like to ride a mix of local and mountain riding and don't have deep pockets, maybe the shorter lugged track is a better choice.
Food for thought.