tipping truck in Edmonton

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
looking for help finding a trucking company in Edmonton that has the ability to p/u '20 ocean containers with a tipping truck to unload the bulk commodity inside. We have 3 ctrs coming from overseas that need to be off loaded in Wetaskiwin. Tks for your help.
 

Trukker

Active VIP Member
Joined
Dec 16, 2008
Messages
899
Reaction score
1,711
Location
High River
Container King in Edmonton can pick up containers off of ground etc but i don't know anyone that can tilt them and unload bulk commodity . May have to go with a towing company that can winch them on they tilt the deck.
 

RMK Junky

Active VIP Member
Joined
Mar 15, 2009
Messages
3,258
Reaction score
1,044
Location
Grande Prairie AB.
Website
www.snowandmud.com
Last edited:

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
Tks! Unfortunately, they used to have a ctr tipping truck but they have since sold it as it was old and planning to buy a new one - which they haven't yet.

Container King in Edmonton can pick up containers off of ground etc but i don't know anyone that can tilt them and unload bulk commodity . May have to go with a towing company that can winch them on they tilt the deck.
 

mach123

Active VIP Member
Joined
Jan 22, 2008
Messages
2,005
Reaction score
762
Location
St. Albert
Well get container delivered and then use crane to dump out what ever you have in it.......Good luck
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
Ya! Whats in the container that you have to spill it out? Is this a new method of unloading seacans? Lol! I've seen a couple loads of pipe and a load of dogfood once unloaded off a semi that way...
 

teamgreen

Active VIP Member
Joined
Mar 28, 2007
Messages
2,080
Reaction score
1,880
Location
Airdrie
Couldnt you just have it dropped on a flat deck tow truck? How long of a container? And again, whats in it?
 

mathrulz

Active VIP Member
Joined
Feb 4, 2008
Messages
283
Reaction score
365
Location
Northern Alberta
I've seen photos of trucks hauling woodchips to a mill unloaded in a similar way to this - drive on a big platform that lifted the whole truck up on a slant and dumped the chips.

Wouldn't it be easiest to ship with trucks that have a hydraulic cylinder to dump the box - can unload anywhere?

Might be able to make it work with an oil field bed truck or winch truck too. Just pull the container part-way on and drive forward... Should be lots of these trucks around Nisku and leduc with spring breakup right now.
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
tks guys for the info. FYI, these are '20 ft seacans with 2 ctrs loaded with feed corn and 1 ctr loaded with soymeal for the feed industry. We are importing this from India due to shortages here in N.America. We will end up off loading sea cans on the ground then use a vacuum to take goods out.
 

RMK Junky

Active VIP Member
Joined
Mar 15, 2009
Messages
3,258
Reaction score
1,044
Location
Grande Prairie AB.
Website
www.snowandmud.com
tks guys for the info. FYI, these are '20 ft seacans with 2 ctrs loaded with feed corn and 1 ctr loaded with soymeal for the feed industry. We are importing this from India due to shortages here in N.America. We will end up off loading sea cans on the ground then use a vacuum to take goods out.

Watch out for snakes ...
 

RMK Junky

Active VIP Member
Joined
Mar 15, 2009
Messages
3,258
Reaction score
1,044
Location
Grande Prairie AB.
Website
www.snowandmud.com
You'd be surprised. Company I worked for last winter hauling frac sand loaded from an import yard near red deer. These were bags that had to be cut open hanging from a fork lift. A couple times snakes were found when emptying the bags. Needless to say the drivers never went back. This was a special frac sand from China. The snakes find their way into the bags and burrow to the center for heat. They were a small venomous snake to. Never did hear what it was called.
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
I can just imagine! I have been exporting for 23 years now and have some stories myself. We were exporting organic grapes from Mexico to UK about 10 years ago. Grapes are hand picked and put into retail bags after a quick wash. We got in trouble for sending a venomous spider with the grapes. That f%^$ing spider costed me US$22,000.00!!! BUT, it could have been worse if it bit someone.
Another time we were exporting dry cat food from a plant here in Armstrong to Japan. They closed the doors and 28 days later the Japanese opened the sea can to find a Armstrong cat inside. He must have been a bit thirsty but he had plenty of food and that cat costed me $10,000 bucks in claims! Apparently they kept the cat.


You'd be surprised. Company I worked for last winter hauling frac sand loaded from an import yard near red deer. These were bags that had to be cut open hanging from a fork lift. A couple times snakes were found when emptying the bags. Needless to say the drivers never went back. This was a special frac sand from China. The snakes find their way into the bags and burrow to the center for heat. They were a small venomous snake to. Never did hear what it was called.
 

woody_tobius_jr

Active VIP Member
Joined
Nov 9, 2009
Messages
1,349
Reaction score
1,430
Location
Morinville, AB
Depending on how heavy the cans are, you could use a winch truck and scissor neck - bring it up onto the trailer just past the tipping point, open the door and shake it back so it tips again, this would probably work for you. Or maybe find somebody with a texas bed, or a small bed truck, again bringing it up before you open the doors. my .02 worth.
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
Tks for the suggestion! The net weight is 20 mt plus weight of can.

Depending on how heavy the cans are, you could use a winch truck and scissor neck - bring it up onto the trailer just past the tipping point, open the door and shake it back so it tips again, this would probably work for you. Or maybe find somebody with a texas bed, or a small bed truck, again bringing it up before you open the doors. my .02 worth.
 
Top Bottom