tipping truck in Edmonton

sledhead_2002

Active VIP Member
Joined
Nov 27, 2008
Messages
2,207
Reaction score
454
Location
Winterpeg
Website
www.imperialseed.com
a grain vac is your best bet, for the corn. the meal, i dont think the vac will work with the meal, might blow most of it out the cyclone. let me know how you make out Dennis

Cheers n good luck
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
Tks Curt for the heads up! Never thought about the meal so I will bring it up to my customers attn. They also have a bob cat so push come to shove they may have to use that on the meal.

a grain vac is your best bet, for the corn. the meal, i dont think the vac will work with the meal, might blow most of it out the cyclone. let me know how you make out Dennis

Cheers n good luck
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
Get Bed truck suck it up on the roll set it down and back into it while letting out the winch line it'll dump.
I'm assuming they are open top cans. If only doors on it pop the seal and look out its coming at you live lol
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
no these are not open top cans.

Get Bed truck suck it up on the roll set it down and back into it while letting out the winch line it'll dump.
I'm assuming they are open top cans. If only doors on it pop the seal and look out its coming at you live lol
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
How do they load them? Is there a wall in behind the doors to hold the product from coming out the doors? I thinking bobcat will be easiest way by the sounds of it
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
they are loaded with an auger and as they make there way to the doors they close one half of the door and put a bulk head in the opening of the other door leaving 1/4 exposed open.

How do they load them? Is there a wall in behind the doors to hold the product from coming out the doors? I thinking bobcat will be easiest way by the sounds of it
 

magnet

Active VIP Member
Joined
Apr 29, 2008
Messages
5,364
Reaction score
1,391
Location
GSBA
Oh sounds nice lol have fun probly really neat after it all settles out during transport. Probly heavy as hell as well.

Used to deliver cans of bagged rice from china to downtown Edmonton with my uncles company. No pallets all in floor they would have about 20+ guys could unload a 20' can in a couple hrs unreal how fast they could do it heavy bags to like 55lbs if I remember right
 

eclipse1966

Active VIP Member
Joined
Nov 1, 2010
Messages
4,599
Reaction score
7,824
Location
Armstrong BC
generally speaking, inbound cargo to Canada is usually palletized and outbound to Asia is floor stacked. Labour is too expensive here to have guys unload by hand.

Oh sounds nice lol have fun probly really neat after it all settles out during transport. Probly heavy as hell as well.

Used to deliver cans of bagged rice from china to downtown Edmonton with my uncles company. No pallets all in floor they would have about 20+ guys could unload a 20' can in a couple hrs unreal how fast they could do it heavy bags to like 55lbs if I remember right
 
Top Bottom