This guy right here is gonna be another Boost-it customer!

samsquatch47

Active VIP Member
Joined
Sep 17, 2008
Messages
300
Reaction score
180
Location
St Paul, AB
Website
www.powermerchants.ca
My Impulse Nytro is headed in this week to NM for his Boost-it fuel system. I got my fingers crossed it will run fantastic when he's done and the sled will be better then ever! I will keep Y'all up to speed on how it runs.
Cheers!
:D
 

big_red1a

Active member
Joined
Feb 6, 2010
Messages
79
Reaction score
48
Location
Moose jaw
Just to be clear did both these Nytros have the stand-alone? Did they have the wide-band auto-correction map? Which seat you guys running on the impulse nytro? Keep me informed how it works samsquatch47
 

samsquatch47

Active VIP Member
Joined
Sep 17, 2008
Messages
300
Reaction score
180
Location
St Paul, AB
Website
www.powermerchants.ca
Just to be clear did both these Nytros have the stand-alone? Did they have the wide-band auto-correction map? Which seat you guys running on the impulse nytro? Keep me informed how it works samsquatch47

I seen the sled from this video it is at NM's right now. Yes it had the standalone with auto tune before Boost-it. Yes it ran like crap:p that way! The video of it is from the first day of riding with Boost-it! Neil and TJ seem like stand up guys and they have a lot of cool stuff coming down the road! The sled in the video is running a stock seat. Looks kinda unfinished with that seat. I like the WRP one more, it covers up all the wires, hoses etc real nice. Pumped to get my Nytro back!
 

Adrenaline Addiction

Active VIP Member
Joined
Aug 25, 2008
Messages
417
Reaction score
318
Location
Red Deer Lake, AB
I seen the sled from this video it is at NM's right now. Yes it had the standalone with auto tune before Boost-it. Yes it ran like crap:p that way! The video of it is from the first day of riding with Boost-it! Neil and TJ seem like stand up guys and they have a lot of cool stuff coming down the road! The sled in the video is running a stock seat. Looks kinda unfinished with that seat. I like the WRP one more, it covers up all the wires, hoses etc real nice. Pumped to get my Nytro back!

The one in the video is a Motleyone seat, best looking IMO for the Impulse Nytro's.
 

samsquatch47

Active VIP Member
Joined
Sep 17, 2008
Messages
300
Reaction score
180
Location
St Paul, AB
Website
www.powermerchants.ca
Just got word from Neil, Boost-it is installed and it starts and idles PERFECT! :d No more slobbering, stalling, pig rich idle! OH YEA BABY! I'm excited to see and hear it tomorrow!
 

samsquatch47

Active VIP Member
Joined
Sep 17, 2008
Messages
300
Reaction score
180
Location
St Paul, AB
Website
www.powermerchants.ca
Picked up my Nytro today! It runs fantasic! WOW! No more stalling slobbering idle! All turbo sleds should run like this! The boys explained the fuel control box,it seems very easy and simple to tune. First real test will be Revy or golden on Nov 24;)! They also cleaned up a bunch of wiring and clutched the sled properly. Cant wait to go for a rip! Thank you so much Boost-It crew!
 

powder muncher

Active member
Joined
Jan 12, 2010
Messages
72
Reaction score
12
Location
Whitehorse
How do I get a hold of the boost it guys? Looking to get a set up for a supercharger and have not got a reply on the email from there web site.

Does anyone have a Phone #

thanks.........
 

cscherer

Active VIP Member
Joined
Jan 23, 2007
Messages
517
Reaction score
265
Location
fort saskatchewan
I will be a member to boost it as well.......How did the sled run on the 24th, what boost #s are yo running ect....the skinny pls
 

samsquatch47

Active VIP Member
Joined
Sep 17, 2008
Messages
300
Reaction score
180
Location
St Paul, AB
Website
www.powermerchants.ca
I will be a member to boost it as well.......How did the sled run on the 24th, what boost #s are yo running ect....the skinny pls
I was waiting on a shock to get rebuilt but the parts didn't make it in time to ride. I'm headed to Valemount weds night riding thurs and friday. I will post how it works after that. I'm hoping to run around the 17psi mark with straight av gas maybe a lil higher. I will see how hard it pulls first I guess. Its a brand new rebuilt motor too so I don't wanna be too rank on it the first ride.
 

samsquatch47

Active VIP Member
Joined
Sep 17, 2008
Messages
300
Reaction score
180
Location
St Paul, AB
Website
www.powermerchants.ca
Rode Clemina on Thursday, then drove to McBride and rode Renshaw on Friday. All I can say is WOW! The sled ran fantastic! Never had a sled that I could cruise down the trail and enjoy the scenery like its a 550fan, then when you get to the alpine rip your arms off! It was so smooth, yet responsive and pulled like a freight train at 20psi:d! You could chop the throttle, get back on it as many times as you want and it wouldn't miss a beat. I only had one lean spot around 5000-6000 that I couldn't figure out. I drove to Neil's on the way home and he fixed it in five minutes. All it was, was the threshold was set too high. This was causing the injectors to kick in once boost was at about 3-4psi instead of just over 0psi. He brought down the threshold number a few points and now its golden! I probably could have figured it out over the phone but I was still a little chicken about playing with all the settings myself. Now that I understand the box better I have more confidence for sure. It was really cool to be able to double with my girlfriend and not have the sled slobbering and stalling and sputtering all the time. Very impressed with Neil s customer service as well! Would recommend the boost-it system to anyone!:D
 
  • Thanks
Reactions: NM

Carrots

Active VIP Member
Joined
Nov 23, 2009
Messages
4,265
Reaction score
2,079
Location
spruce grove, alberta
Rode Clemina on Thursday, then drove to McBride and rode Renshaw on Friday. All I can say is WOW! The sled ran fantastic! Never had a sled that I could cruise down the trail and enjoy the scenery like its a 550fan, then when you get to the alpine rip your arms off! It was so smooth, yet responsive and pulled like a freight train at 20psi:d! You could chop the throttle, get back on it as many times as you want and it wouldn't miss a beat. I only had one lean spot around 5000-6000 that I couldn't figure out. I drove to Neil's on the way home and he fixed it in five minutes. All it was, was the threshold was set too high. This was causing the injectors to kick in once boost was at about 3-4psi instead of just over 0psi. He brought down the threshold number a few points and now its golden! I probably could have figured it out over the phone but I was still a little chicken about playing with all the settings myself. Now that I understand the box better I have more confidence for sure. It was really cool to be able to double with my girlfriend and not have the sled slobbering and stalling and sputtering all the time. Very impressed with Neil s customer service as well! Would recommend the boost-it system to anyone!:D

Did you notice any difference in fuel mileage?


Sent from my mobile phone
 

MoThEr TrUcKeR

Active VIP Member
Joined
Oct 13, 2011
Messages
363
Reaction score
232
Location
Alberta
Took mine out today with the new boost-it installed and quite a nice difference. Unreal easy to tune and mess with if you need too that is. Great work and thanks to Nm and his team!!! BOOST-IT
Did you notice any difference in fuel mileage?


Sent from my mobile phone
 
  • Thanks
Reactions: NM

Carrots

Active VIP Member
Joined
Nov 23, 2009
Messages
4,265
Reaction score
2,079
Location
spruce grove, alberta
Took mine out today with the new boost-it installed and quite a nice difference. Unreal easy to tune and mess with if you need too that is. Great work and thanks to Nm and his team!!! BOOST-IT

I wish I could get mine done but I'm a little tight on funds especially since I just blew out my rear shock lol




Sent from my mobile phone
 
Top Bottom