The showdown sept 17 "brule" who's going?

[HONDA310R]

As the title says Sept 17/10 weekend Out at Brule gonna have a little Drag Shootout Who's all gonna be out there?

H310R

 

[Ushkie]

Ill be out there on the shee and the gf will be on her bike. I can be the trailing camera of the drags lol

 

[note]

I would like to try to make it out. ill be gunnin down all the 250f's

 

[drewski]

Unfortunately I will not be making the trip.

 

[HONDA310R]

unfortunately i will not be making the trip.

what?

 

[drewski]

Well besides sending my bent axle in for warranty inspection, I found a couple other things wrong. I now need a new rear rotor, the rubber engine inserts in the case are toast. Most likely from leaving them in when I PCed the cases, I did a leakdown test last night that isn't up to par and now I found a big chunk of steel in my oil. The engine is out of my quad right now and I'm about to tear into it. I think I took a tooth of a gear somewhere in the transmission. I have a lot of work to be ready for Brule. We'll see.

 

[HONDA310R]

Well besides sending my bent axle in for warranty inspection, I found a couple other things wrong. I now need a new rear rotor, the rubber engine inserts in the case are toast. Most likely from leaving them in when I PCed the cases, I did a leakdown test last night that isn't up to par and now I found a big chunk of steel in my oil. The engine is out of my quad right now and I'm about to tear into it. I think I took a tooth of a gear somewhere in the transmission. I have a lot of work to be ready for Brule. We'll see.

Thats shitty well you still got 2 weeks lol

 

[drewski]

I'm on it

 

[note]

Well besides sending my bent axle in for warranty inspection, I found a couple other things wrong. I now need a new rear rotor, the rubber engine inserts in the case are toast. Most likely from leaving them in when I PCed the cases, I did a leakdown test last night that isn't up to par and now I found a big chunk of steel in my oil. The engine is out of my quad right now and I'm about to tear into it. I think I took a tooth of a gear somewhere in the transmission. I have a lot of work to be ready for Brule. We'll see.

NOOOOOOO!

 

[psullivan]

I cant make it that weekend but ill be there sept 10-12.

 

[Trashy]

I'm still considering being there. but I would be bringing my woodhauler....LOL

 

[flying frenchman]

Hey! That's cool, a Showdown. Sounds good to me. So the drags are on Friday the 17th during the day or at night ?

 

[HONDA310R]

Hey! That's cool, a Showdown. Sounds good to me. So the drags are on Friday the 17th during the day or at night ?

I think friday is the start day we will call it the test and tune day as ill need that lol....but i think the real riding/some draging will be sat.

 

[flying frenchman]

Any specific time you want to have the fun drags? Are they at drag hill ? Maybe I could bring my shovel to smooth out those back tingling bumps at the bottom.

 

[Modman]

Any specific time you want to have the fun drags? Are they at drag hill ? Maybe I could bring my shovel to smooth out those back tingling bumps at the bottom.

Just get a heavy piece of lumber (like a railroad tie or some rough cut 2X6) and chain and drag it around behind a 4x4 quad in 4 wheel drive, easiest and fastest way to smooth things out. I would drag the hill and then keep it handy because after a few passes you are going to have to drag the start area again otherwise you will get some big holes developing.

 

[flying frenchman]

Great Idea. But unless someone else can haul that smoothing device it won't get there, as I don't pull anything with the shee other than me and the hills.

 

[Modman]

Great Idea. But unless someone else can haul that smoothing device it won't get there, as I don't pull anything with the shee other than me and the hills.

Yeah, I figure you can probably find someone to haul it (not sure how far the hill is from the parking lot - figured kinda close anyway) if they are heading out there. If its like 30 miles to the hill - forget it, take a shovel and then just keep moving the starting line over ever few guys. You're going to need a 4x4 to pull it anyway if you choose to go that route for smoothing the track, a banshee will make more mess than it will fix, just trying to pull it around.

 

[HONDA310R]

Yeah, I figure you can probably find someone to haul it (not sure how far the hill is from the parking lot - figured kinda close anyway) if they are heading out there. If its like 30 miles to the hill - forget it, take a shovel and then just keep moving the starting line over ever few guys. You're going to need a 4x4 to pull it anyway if you choose to go that route for smoothing the track, a banshee will make more mess than it will fix, just trying to pull it around.

i say leave the whoops i gotta try the new shocks and wider a-arms in the front lol.

 

[flying frenchman]

Don't ya know stock supension rocks lol. I don't usually go fast enough anyways to feel the bumps that bad, but I've seen a few people rubbing their backs in the past. Oh well if they're to big then we'll have to jump them on the way up.

 

[looneyrod27]

there are gonna be a few of us coming down from Fort. Mac that weekend, not sure if there will be much draggin, but definetly lots of drinkin!