sub frame

[sledslut]

So, im going to look like the retard here after what i posted but

last night look at my sled, and noticed that its front end is out of wack.

so just wondering instead of getting a OEM subframe what or if anyone is
making an aftermarket one or what they are doing after u bend one?

im going to ride it telll i figure it out im just courious to what ppl are doing

cheers guys!!!

 

[Summitric]

So, im going to look like the retard here after what i posted but

last night look at my sled, and noticed that its front end is out of wack.

so just wondering instead of getting a OEM subframe what or if anyone is
making an aftermarket one or what they are doing after u bend one?

im going to ride it telll i figure it out im just courious to what ppl are doing

cheers guys!!!

show pics???? whats twisted?

 

[sledslut]

hit a tree on the right hand a-arm and pushed it back about 1-2" so its a little twisted somewhere

 

[thebigm]

Extremely common obviously. I have been through two on my 2008 Nytro MTX. There are some stiffeners you can add to the OEM which is what I did. They were offering a new upgraded one from Yamaha but it was still a little weak. I believe that (T-Nytro) on here has some made up already. After I did a little modifying it has stood up well. I hit a tree late in the season and sheared the ski right off bent the A-arms and no sub frame damage. Good Luck.

Cheers,

 

[SLY]

hitting a tree will probably bend an 09 too. Something has to give Could have been worse I guess. You know we'll help you Sledslut but you have to look where you're going:d

 

[RaspberryNytro]

hit a tree on the right hand a-arm and pushed it back about 1-2" so its a little twisted somewhere

We're all a little twisted somewhere!!!:d
It's just the same as the early rev's.......flying nuns took the damaged instead of bending A arms. Wish it wasn't such a big job to fix it though,. Maybe get mine repaired this year too

RN

 

[TAV]

Sledslut have you tried tightening the bolts on your front suspension. maybe something is loose and throwing it outta wack. dont be afraid of a wrench buddy. lol

 

[all-4-stroke]

definatelythe sub frame. same tell tale sign too, one ski a lil farther back than the other. tweaked mine last year got the updated one put in (thanks insurance!) and so far its been holdin up. only time will tell :d

 

[sledslut]

thats funny.. but it was one loose bolt, but something is still a little bent
looks to only be the one lower control arm. so happy about that too!!

Sledslut have you tried tightening the bolts on your front suspension. maybe something is loose and throwing it outta wack. dont be afraid of a wrench buddy. lol