stuff to do on SxS before next ride

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,933
Reaction score
56,107
Location
Leduc
Hitch getting build this week

Stilling looking for cup holders
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
58,387
Reaction score
51,838
Location
alberta from the back porch

new support vehicle/ camper, for those times when you can't carry enough axles.

2185d1452073045-camper-top-rear-bed-cover-10939495_877846885600399_173420148_o.jpg
 
Last edited:

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,933
Reaction score
56,107
Location
Leduc
wash, grease, check over, find cup holders
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
58,387
Reaction score
51,838
Location
alberta from the back porch
may be a good idea to carry a fire extinguisher or a couple gallons of water in this dry weather. the chances of muskeg smoldering on the exhaust will be very high, as well as grass fires .
 

rzrgade

Active VIP Member
Joined
Sep 22, 2008
Messages
7,580
Reaction score
14,760
Location
West of Toronto
Got some new shoes ... Just in case it rains ......
b8c47628c40a7426c2c9339ce632b897.jpg



Sent from my iPhone using Tapatalk
 

j335

Active VIP Member
Joined
Jan 3, 2007
Messages
1,873
Reaction score
1,821
Location
AB
may be a good idea to carry a fire extinguisher or a couple gallons of water in this dry weather. the chances of muskeg smoldering on the exhaust will be very high, as well as grass fires .

Good idea. I've got a fire extinguisher packed in my box along with carrying and axe and collapsible bucket.
We battled a brush pile fire last year and we found axes were our best tool since there wasn't water nearby. We just controlled it from growing and eventually burnt itself out.

Any of you guys mounting your fire extinguisher to the roll cage? How you gonna do it?
 

arff

Active VIP Member
Joined
Apr 21, 2009
Messages
141,933
Reaction score
56,107
Location
Leduc
Remove the skid plate. Need to remove the mud Ron H made me drive in.

Finish installing the antenna
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
58,387
Reaction score
51,838
Location
alberta from the back porch
Yes, joint will come apart if pulled on. Trying to pull cv joint from front diff, Usually results in axle pulling out of cv joint.
Appears to be fine mud? No rust present on cv end.


Sent from my iPhone using Tapatalk
 

BIG DAWG

Active VIP Member
Joined
May 3, 2010
Messages
479
Reaction score
370
Location
Delburne Ab
theres a good chance with the bracket lift upon full extension you have ground the inside of the cup enough to damage where the ring seats...
I have tried different brackit lifts in the past and had this issue and ended up building my own in between stock and said bracket lift height...

consider pulling opposite axle and driving the axle your having issues out with a bar from the otherside through the diff
(not sure if this will work on your particular machine but a trick I have used in the past)
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
58,387
Reaction score
51,838
Location
alberta from the back porch
No don't think that will work, Has cups in diff, I got axle stub out, Used home made puller, I need to clean it up and take a good look.


Sent from my iPhone using Tapatalk
 
Top Bottom