Stock spark arrester drill out

[kokanee 800]

08 BF -- WANT TO HOLESAW THE S. ARRESTER OUT OF THE EXHAUST, JUST INSIDE THE OUTER RING. LEAVES ME WITH ABOUT A 2" HOLE,

HAS SOMEONE DONE THIS, I WOULD PUT A SCREEN BACK IN..


MINE IS 2 PLUGGED UP, DONT WANT A PIPE.


THANKS.

 

[Puba]

It can be done, you can even get the after market spark arrestor back in if you want.

Do you not have a screw out plug somewhere on you pipe that can be screwed out and blow the blockage out without having to butcher the arrestor? Most exhaust systems have a plug of some sort.

08 BF -- WANT TO HOLESAW THE S. ARRESTER OUT OF THE EXHAUST, JUST INSIDE THE OUTER RING. LEAVES ME WITH ABOUT A 2" HOLE,

HAS SOMEONE DONE THIS, I WOULD PUT A SCREEN BACK IN..


MINE IS 2 PLUGGED UP, DONT WANT A PIPE.


THANKS.

 

[note]

well you could go on ebay and type in 3D CNC BILLET EXHAUST TIP and find your modle! they have it for virtuly every year.

 

[kokanee 800]

Yes it has a plug , but the wadding itself is all messed up, wont blow out, I sank it last oct, in some skanky skag and since then my exhaust has a thick like scale all over it and inside baffle, took off the muffler ( what a stupid setup. You can take one pipe off the exhaust and the back cylinder one is straight welded to it, what a joke.) brought the muffler into the sandblaster, shot the entire o.d, blew the hell out it with compressor, and its still plugged.

 

[kokanee 800]

The blockage is inside the wadding not inside exhaust can itself.