Sticking throttle?!?

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Hello all,
So on Sunday morning we were going for a nice family ride...
We pulled all the sleds outta the shop and let them warm up. Shut em down and got geared up. Jumped back on the sleds and were gonna head out of the farm yard out to play in the meadows.
My dad bought a 2010 xp 10 days prior and this would have been his 4th ride on it.
He rode 50feet from the shop and was turning the corner to head down the hill.
The sled opened right up and drove him straight through the fence and into a poplar tree and down the hill. The distance traveled was 15 feet he tried to bail but couldn't get off in time. STARS flew him out because of previous head injuries. He is now recovering in the hospital with a shattered arm and lotsa bumps and bruises. VERY LUCKY and thank fawk for helmets.!!

Long story short any ideas on why this happened and how does one prevent this ?!? Tach reads 6800 and speedo is 55km/hr.
ImageUploadedByTapatalk1357092214.180340.jpg
ImageUploadedByTapatalk1357092249.810221.jpg
ImageUploadedByTapatalk1357092282.996584.jpg
ImageUploadedByTapatalk1357092318.889970.jpg
Thanks,
Ride Safe!!
Devon
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,149
Reaction score
14,426
Location
Roma, Alberta
wow....wishing your pa a speedy recovery, that is scary man.

did he turn left or right when it opened up? could the cable possibly tightened up if he was turning right? being it was the fourth ride one would think if it was a cable routing issue it may have shown itself previously. doesn't make sense that he turned and pinned the throttle himself
 

Nytroman

Active VIP Member
Joined
Aug 18, 2008
Messages
836
Reaction score
722
Location
Barrhead
Wows that's brutal. Hope he recovers well. Hard to guess but with bad circumstances and timing of cold hot cold conditions and with this fine snow we have a very good chance of a frozen throttle but why would the TORS not overide it???
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Thanks man ya it was intense.
He would've been turning right but wasn't quite to the corner yet. The tracks went straight.
All he remembers was it opening up and trying to bail.
 

imdoo'n

Active VIP Member
Joined
Jan 15, 2008
Messages
58,430
Reaction score
51,887
Location
alberta from the back porch
it happens friggin fast, he's lucky to be alive. everytime i start the sled in the fall and the firtst run it scares the crap outta me, they have some badass acceleration. looks like an insurance claim.
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Ya it happens fast for sure and he is lucky to be alive. His helmet is trashed. He went through 7hrs of surgery on his elbow and fore arm yesterday. Hopefully he regains full use of his arm, but could always be worse.
The sled itself is oddly still straight some plastic and electronics and a tunnel is all it needs. I'm gonna fix it and hope he rides it next year!!
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Just picked him up from the hospital.
23 screws, 4 plates and a roll of wire.
That ought-a slow him down for a while.
 

skeeter800x

Active member
Joined
Oct 12, 2009
Messages
53
Reaction score
33
Location
vernon
Is there a left hand throttle. I had a similar problem; when i turned hard left my right hand engaged the left throttle plate that was connected to my right throttle.
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Yep bang on. He had the same set up. Those things are a joke. IMO of course
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
It's kinda funny now because I took the one off my wife's sled a few weeks ago and threw it out. Then by brother in law and my dad have been bugging her saying they will sell theirs to her.
Hmmm now they are all in the garbage and at least we can laugh about it!!
 

flabbajabba

Active VIP Member
Joined
Mar 7, 2008
Messages
746
Reaction score
299
Location
Edmonton
Hope he has a speedy recovery!

I've seen more sleds in the trees with those lefty thottles than I've seen people who use them on purpose?
 

teeroy

Active VIP Member
Joined
Oct 7, 2007
Messages
9,149
Reaction score
14,426
Location
Roma, Alberta
Hope he has a speedy recovery!

I've seen more sleds in the trees with those lefty thottles than I've seen people who use them on purpose?
a bunch of years back there was a dude in clemina parking lot (I think it was) that was loading into an enclosed and grabbed the lefty instead of the brake. it was ugly, he was messed up bad
 

team-x

Active VIP Member
Joined
Sep 4, 2012
Messages
228
Reaction score
129
Location
Edmonton
Again in 08 (first ride of my new 09) in the clemina parking lot we were parked next to a guy who was loading on an open trailer, he didn't have the pin in though he was grabbing break but pinned it. Launched it over the trailer and into the tailgate, but a big dent in that, rolled off the side of the trailer and almost smashed into my brothers truck but missed it by inches.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
108,810
Reaction score
105,773
Location
Milo,Alberta
They are the most dangerous add on you can put on a sled. Bar none. Sorry to hear about your Dad Devon. Hope he is feeling better.
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Well.. I took the xp for the first ride today since the rebuild and it took me for a ride. Must have a fray in the throttle cable I am gonna change it out and run er on the chain hoist next time!
What causes this to happen. The sled doesn't even have 1200km on it. Or is it just one of those freak incidents. I put more km a year than that on my sleds and have never had an issue.
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Hmmm now that I think about it more might be a carb because the cable itself was springing back. I had to flip it a few times before it would idle back down ?
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
108,810
Reaction score
105,773
Location
Milo,Alberta
Its not uncommon for the cable to fray on those models. Usually down by the oil pump. It could be a carb issue but I'd look down low first. Ugly job to replace those. Some shops have charged as much as 4 hours I've heard. You will need to get a dealer to reset the TPS as well when you replace it.
 

Nitrobkr

Active VIP Member
Joined
Mar 19, 2011
Messages
534
Reaction score
585
Location
Strathmore
Thanks Ken, I'll probably just bring it in.
I'm kinda over it haha.
 
Top Bottom