Something looks wrong here....

adamg

Active VIP Member
Joined
Mar 8, 2011
Messages
3,490
Reaction score
4,734
Location
S'toon,SK
Took me a long time to realize it, but the toothbrush is stuck into the electric brake breakaway switch. There is supposed to be a little cable connected from that breakaway switch to the truck hitch. *shudders*

And as for the upside down piece, I have always called that component the ball mount. The receiver is also known as a hitch - the part that holds the ball mount.
 

gibsons

Active VIP Member
Joined
Nov 14, 2009
Messages
8,450
Reaction score
4,723
Location
Blackstrap Sask
It wouldn't have taken you that long Adam, if you would have read the second post.
Took me a long time to realize it, but the toothbrush is stuck into the electric brake breakaway switch. There is supposed to be a little cable connected from that breakaway switch to the truck hitch. *shudders*

And as for the upside down piece, I have always called that component the ball mount. The receiver is also known as a hitch - the part that holds the ball mount.
 

tiger666

Active VIP Member
Joined
Apr 29, 2013
Messages
1,505
Reaction score
1,457
Location
edmonton,ab
I would go out and buy a lottery ticket if I was him,and you guys a beer.LUCKY
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,480
Reaction score
29,339
Location
Parkland County
Driving downtown, and come across this... creative use for a toothbrush, Guy should get a Darwin Award for this safe work practice...

there's 2 ways to look at this Jason.......

1) hopefully the trailer doesn't disconnect from the truck and the brakes need activating..........

2) he's always got a tooth brush with him when he's taking his trailer somewhere
 

Pistonbroke

Active VIP Member
Joined
Oct 10, 2007
Messages
3,370
Reaction score
11,221
Location
Cockring, AB
Driving downtown, and come across this... creative use for a toothbrush, Guy should get a Darwin Award for this safe work practice...


Sheeeeit, took me while to see what is wrong here but I got 'er figgered. If you look just below the tailgate handle, you can see an oval emblem. This nutcase was trying to pull something with a Ford!

;)
 

Bisch

Active VIP Member
Joined
Apr 12, 2009
Messages
571
Reaction score
948
Location
Edmonton
Sheeeeit, took me while to see what is wrong here but I got 'er figgered. If you look just below the tailgate handle, you can see an oval emblem. This nutcase was trying to pull something with a Ford!

;)

LOL! Ford trucks don’t do stupid like this on their own. You must be a Ram owner.
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,480
Reaction score
29,339
Location
Parkland County
Sheeeeit, took me while to see what is wrong here but I got 'er figgered. If you look just below the tailgate handle, you can see an oval emblem. This nutcase was trying to pull something with a Ford!

;)

its okay Cale, its a F150.......
 

Culvert

Active VIP Member
Joined
Jan 4, 2007
Messages
1,040
Reaction score
251
Location
Cold Lake, Alberta
Just to throw a question out after seeing all these mess ups. What is the proper length of chain to have? Mine are always crossed to act as a cradle. But would like to know how much length is needed to be safe?
 

whoDEANie

Active VIP Member
Joined
Feb 8, 2009
Messages
4,633
Reaction score
8,479
Location
Edmonton
Just to throw a question out after seeing all these mess ups. What is the proper length of chain to have? Mine are always crossed to act as a cradle. But would like to know how much length is needed to be safe?

The chains shouldn't drag on the ground and should be long enough that they won't bind when the trailer is fully jackknifed. Ideally, the cradle formed by the crossed chains should prevent the hitch from hitting the ground - apparently it's even law in a few states.
 

09 arctic cat m8

Active VIP Member
Joined
Feb 18, 2011
Messages
1,035
Reaction score
1,223
Location
canada
Towing A Trailer
When towing a trailer, you should allow more room between vehicles before entering into traffic. It will take you longer to reach the speed of the traffic flow because of the extra weight of the trailer. By the same token, it will also take you longer to stop so you should increase the following distance between you and the vehicle ahead.
Here are some other things to remember when towing a trailer:

  • A trailer must be registered and licensed before it can be used on the road.
  • If driving on multi-lane highways, remember that slower-moving vehicles should stay in the right-hand lane.
  • Plan your driving. Avoid situations that may require quick lane changes or unexpected stops.
  • If traffic builds up behind you, find a safe place to move over and let others pass.
  • Your trailer must have working taillights, brake lights and turn signals that are activated from the towing vehicle.
  • If you have a ball-and-socket hitch, you will also need safety chains as a secondary means of attachment. Chains should be crossed under the tongue of the trailer and correctly fastened. This applies to all trailers except fifth-wheel trailers.
  • If your trailer is equipped with a breakaway emergency supplemental braking system, make sure that the system is properly connected according to the manufacturer's instructions.
  • Adjust vehicle mirrors to clearly see traffic approaching from behind. You must use extension mirrors if the trailer is wider than the towing vehicle.
 

niner

Active VIP Member
Joined
Mar 14, 2009
Messages
8,685
Reaction score
62,642
Location
lacombe
Towing A Trailer
When towing a trailer, you should roll coal to allow more room between vehicles before entering into traffic. It will take you less time and leave the intersection filled with black smoke to reach the speed of the traffic flow because of the extra weight of the trailer. By the same token, it will also take you less time to stop if you are running bald M/T so you should decrease the following distance between you and the vehicle ahead.
Here are some other things to remember when towing a trailer:

  • A trailer must be registered and licensed before it can be used on the road.
  • If driving on multi-lane highways, remember that slower-moving vehicles should stay in the right-hand lane. If you come across a slow driver in the left lane, simply blast them with your LED light bar.
  • Plan your driving. Avoid situations that may require quick lane changes or unexpected stops. Insure all passengers are well hydrated with beer , and take frequent piss brakes after passing everyone.
  • If traffic builds up behind you, find a safe place to move over and let someone with some balls drive your $90000 rig rocket.
  • Your trailer must have working taillights, brake lights and turn signals that are activated from the towing vehicle. Using them will be optional.
  • If you have a ball-and-socket hitch, you will also need safety chains as a secondary means of attachment. Chains should be crossed under the tongue of the trailer and correctly fastened. If chains are too long simply twist them till the proper length has been achieved. This applies to all trailers except fifth-wheel trailers.
  • If your trailer is equipped with a breakaway emergency supplemental braking system, make sure that the system is properly connected according to the manufacturer's instructions.If for some reason your supplemental braking system pin has been ejected, a tooth brush jammed into the slot should be suffice.
  • Adjust vehicle mirrors to clearly see traffic approaching from behind. You must use extension mirrors if the trailer is wider than the towing vehicle. Unless you own a dodge , your mirrors are permanently in the extended position.
  • If coming to railroad crossing, make sure your phone is fully charged so you can take videos and selfies if your trailer slides off the road and gets crushed causing you to end your weekend abruptly.
  • Two sleds on a half ton is perfectly fine as long as they are tied down properly with bungee cords or bailer twine with a good slip knot.
Fixed it for you....
 
Top Bottom