Solid Turbos - Kratos Turbo Kit -Matryx/Axys

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
Kratos Turbo Kit, ECM Flash Torque Link, Bikeman Clutching, Upgraded Injectors 84lb.hr capable of fueling up to 275 HP, Xona Turbo with Ultra High Flow Turbine Wheel, Turbo By-pass in charge box, Zero Lag, Fastest Spooling Turbo Kit on the Market.
4fae6c1eae5749a7a3c0cd201d5b8b83.jpg

54de85ce966a7a88dc720eec0e354e7f.jpg

b6de7ba81be9dc25be965da6a579f8db.jpg

b25de87e6de21762c1e282d9e74779c4.jpg



Sent from my iPhone using Tapatalk
 

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
Kratos Turbo Kit, ECM Flash Torque Link, Bikeman Clutching, Upgraded Injectors 84lb.hr capable of fueling up to 275 HP, Xona Turbo with Ultra High Flow Turbine Wheel, Turbo By-pass in charge box, Zero Lag, Fastest Spooling Turbo Kit on the Market.
4fae6c1eae5749a7a3c0cd201d5b8b83.jpg

54de85ce966a7a88dc720eec0e354e7f.jpg

b6de7ba81be9dc25be965da6a579f8db.jpg

b25de87e6de21762c1e282d9e74779c4.jpg



Sent from my iPhone using Tapatalk

49af706b0bbc1455d64830913ea2dffc.jpg

0a6d5bf077111b70e7f61721943c3a17.jpg



Sent from my iPhone using Tapatalk
 

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
Any dyno numbers yet, can you run pump gas?

No Dyno numbers. We replaced the stock 66lbhr injectors with 94lbhr. We have enough injector to fuel up to 275hp while keeping the duty cycle under 80%. The turbo kit will put out more than that motor can handle.


Sent from my iPhone using Tapatalk
 

650Poo

Member
Joined
Jul 23, 2022
Messages
12
Reaction score
8
Location
Mid BC
So with 4-5Lbs boost and a turbo capable of 275 hp, I would think you would loose throttle response at lower rpm (Not ideal for tree bashing) It would be nice to see something with a smaller turbo and throttle response like a G5 Doo (I don't like the Boost due to its throttle response)
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,184
Reaction score
3,970
Location
Red Deer County
This is a problem with some of the aftermarket turbo kits. Big power, but the bottom end response is lost.
 

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
So with 4-5Lbs boost and a turbo capable of 275 hp, I would think you would loose throttle response at lower rpm (Not ideal for tree bashing) It would be nice to see something with a smaller turbo and throttle response like a G5 Doo (I don't like the Boost due to its throttle response)

This kit has zero lag due to our turbo bypass. Sled runs NA for the first time 0.6 seconds and then the turbo is lit.


Sent from my iPhone using Tapatalk
 

650Poo

Member
Joined
Jul 23, 2022
Messages
12
Reaction score
8
Location
Mid BC
When will you guys have one on the snow ( Videos ) and more details on Hp, boost and fuel requirements?
 

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
When will you guys have one on the snow ( Videos ) and more details on Hp, boost and fuel requirements?

We have had out Matryx on the snow all last year. As far as HP, what ever the motor will handle. We can hit 230 easily. We are running 91 non ethanol with 8oz of Lucas per tank. You may have to start mixing race gas at the higher boost levels


Sent from my iPhone using Tapatalk
 

650Poo

Member
Joined
Jul 23, 2022
Messages
12
Reaction score
8
Location
Mid BC
230 hp on pump gas and Lucas octane boost, is that the base set up? How many lbs boost?
 

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
Or what is the base set up?

Boost pressure is kind of irrelevant. Boost can be looked at as a measurement of restriction. Our kit on 5lbs runs like a Silber at 7lbs due to its efficiency. The kit comes with everything needed including all the clutching. You get 4 springs which you can run individual or stack. 3,5,7,10,12,14 lbs


Sent from my iPhone using Tapatalk
 

SOLID TURBOS

Active member
Joined
Sep 15, 2023
Messages
48
Reaction score
106
Location
WOODS CROSS, UT
Boost pressure is kind of irrelevant. Boost can be looked at as a measurement of restriction. Our kit on 5lbs runs like a Silber at 7lbs due to its efficiency. The kit comes with everything needed including all the clutching. You get 4 springs which you can run individual or stack. 3,5,7,10,12,14 lbs


Sent from my iPhone using Tapatalk

Might just be bast to call me. Jay 801-550-9252


Sent from my iPhone using Tapatalk
 

06 Dragon

Active VIP Member
Joined
Nov 17, 2006
Messages
2,184
Reaction score
3,970
Location
Red Deer County
Nice looking kits. Hopefully they run as good as advertised. Many of us up here have been running aftermarket turbo kits for years. The lag is what spoils it for myself.
Probably a good reason why so many have gone to the factory boosted sleds, including warranty.
Most don’t require over 190-200 hp.
 
Top Bottom