Sled repair in Fernie. Christmas eve??

CLVTCH

Active member
Joined
Sep 3, 2013
Messages
32
Reaction score
42
Location
Here
We are here for the holidays and had a little clearance issue at the red tree Lodge with the sled deck. Long day of driving makes for a dumb decision! Damages aren't bad...

- brake line severed
- brake fluid gone
- handlebars bent
- broken kill switch

The main thing I need fixed is the brake. The other stuff I can make do until we get home. Is there a place in Fernie or close that could repair this on Christmas Eve?

Hoping some local boys like @ferniesnow can chime in here and help me out.

2016 pro rmk


Sent from my iPhone using Tapatalk
 

ThrottleOps

Active VIP Member
Joined
Nov 12, 2011
Messages
1,181
Reaction score
2,718
Location
Elkford/Fernie
Do you have a tether so you can run without a kill? Also are the bars rideable? Can tire will have the brake fluid I have some spare bars pm me if needed I probably have a tether you could wire in also

Hmmm not sure who to try to contact!


Sent from my iPhone using Tapatalk
 
Last edited:

CLVTCH

Active member
Joined
Sep 3, 2013
Messages
32
Reaction score
42
Location
Here
Do you have a tether so you can run without a kill? Also are the bars rideable? Can tire will have the brake fluid I have some spare bars pm me if needed

Hmmm not sure who to try to contact!


Sent from my iPhone using Tapatalk

Thanks for the reply!
Yes I have a tether. I think I can just unplug the kill switch in this case?

Bars are rideable they just need some adjustment to get back to center.

Do you know which brake fluid they run? And does cdn tire sell parts to reattach the brake line? I am not opposed to doing it myself if I can get parts but tools are another story for the brakes.


Sent from my iPhone using Tapatalk
 

ThrottleOps

Active VIP Member
Joined
Nov 12, 2011
Messages
1,181
Reaction score
2,718
Location
Elkford/Fernie
Any dot 3 brake fluid is fine. As per the line I guess it would depend on the condition. Maybe something at can tire to stop the leak? You should be able to unplug the kill switch or just get it in the up position with pliers and leave it up


Sent from my iPhone using Tapatalk
 

CLVTCH

Active member
Joined
Sep 3, 2013
Messages
32
Reaction score
42
Location
Here
Any dot 3 brake fluid is fine. As per the line I guess it would depend on the condition. Maybe something at can tire to stop the leak? You should be able to unplug the kill switch or just get it in the up position with pliers and leave it up


Sent from my iPhone using Tapatalk

Awesome thanks. No the brake line is broken right where it goes into the fitting that bolts to the brake lever, if that makes sense?


Sent from my iPhone using Tapatalk
 

Turts

Active VIP Member
Joined
Oct 3, 2012
Messages
787
Reaction score
881
Location
Cochrane, Ab
Stephenson paint and performance guys are sledders. Ski Doo mostly I think.
Give them a ring.


Sent from my iPhone using Tapatalk
 

Turts

Active VIP Member
Joined
Oct 3, 2012
Messages
787
Reaction score
881
Location
Cochrane, Ab
Also, that's just a hydraulic hose.
Someone in Sparwood would be able to make you up something.


Sent from my iPhone using Tapatalk
 

CLVTCH

Active member
Joined
Sep 3, 2013
Messages
32
Reaction score
42
Location
Here
I left a voice mail with ghost riders and Stephenson. Hopefully someone gets back to me because I don't have flaring tools or anything like that to fix it


Sent from my iPhone using Tapatalk
 

sc800

Active VIP Member
Joined
Nov 3, 2008
Messages
1,405
Reaction score
1,947
Location
Living life at the Lake!
I left a voice mail with ghost riders and Stephenson. Hopefully someone gets back to me because I don't have flaring tools or anything like that to fix it


Sent from my iPhone using Tapatalk
Good luck and hope it works out. Worst case you might have to rent a sled from ghostriders. Keep us posted.

Sent from my ONEPLUS A3000 using Tapatalk
 

Vertical-Extreme

Active VIP Member
Joined
Oct 29, 2008
Messages
612
Reaction score
636
Location
Airdrie Ab
Like Throttle ops said too, Brent at arctic edge is probably around too. He might be your best bet


Sent from my iPhone using Tapatalk
 

Turts

Active VIP Member
Joined
Oct 3, 2012
Messages
787
Reaction score
881
Location
Cochrane, Ab
This guy has a pretty good name as an auto repair shop.
I wonder if Decker could rig something up?


Sent from my iPhone using Tapatalk
 

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,585
Reaction score
86,657
Location
beautiful, downtown Salmon Arm, BC
I have a brake reservoir but not the cable. The other posts above have pretty much described the resources in Fernie. CT my have something to work for the brake line. It would be worth a shot. Good luck and I hope you have a Merry Christmas even with the present problems.
 

CLVTCH

Active member
Joined
Sep 3, 2013
Messages
32
Reaction score
42
Location
Here
Curious, did you do much damage at the red tree lodge?

Sent from my ONEPLUS A3000 using Tapatalk

No. And they were really good about it. Staff offered the maintenance shop if I need to work inside. Awesome ppl here.


Sent from my iPhone using Tapatalk
 

sc800

Active VIP Member
Joined
Nov 3, 2008
Messages
1,405
Reaction score
1,947
Location
Living life at the Lake!
No. And they were really good about it. Staff offered the maintenance shop if I need to work inside. Awesome ppl here.


Sent from my iPhone using Tapatalk
Great to hear! My place is not far from there and if I was still in town I would tell you to come over for a beer but I'm back in Lethbridge for Christmas for a few days.

Sent from my ONEPLUS A3000 using Tapatalk
 

Mach1

Active VIP Member
Joined
Sep 23, 2015
Messages
932
Reaction score
765
Location
Kimberley
I have a flaring tool in shop and going to Calgary tomorrow as I can go through fernie way instead of radium way, let me know as I will be leaving Kimberley about 9ish am. Or text me at 780-243-3348 if you want me to bring to you. I'll check in am. Good luck
 

CLVTCH

Active member
Joined
Sep 3, 2013
Messages
32
Reaction score
42
Location
Here
I have a flaring tool in shop and going to Calgary tomorrow as I can go through fernie way instead of radium way, let me know as I will be leaving Kimberley about 9ish am. Or text me at 780-243-3348 if you want me to bring to you. I'll check in am. Good luck

Thanks for the offer! But I'm going to look at getting a brake line made. Maybe even auto repair as was eluded to above...


Sent from my iPhone using Tapatalk
 
Top Bottom