Sled deck on 1/2 ton?

Frankenytro

Active VIP Member
Joined
Oct 10, 2013
Messages
821
Reaction score
1,561
Location
Edmonton ab
Of course they are! You just have to make sure you don’t have too much tread as the deep tread will make you slip and slide like crazy. Optimum tread depth would be between 2&5 32nds of an inch. This would be even better then running a brand new set of studded winter tires.

Quick question: Are mud tires good in the Snow?
 

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,855
Reaction score
10,130
Location
Cold Lake, AB
I know it's not a half ton, but still seems a little excessive.

e03199e1896202bb43d48470c8cff142.jpg
 

mur190

Active VIP Member
Joined
Dec 17, 2008
Messages
988
Reaction score
1,220
Location
bonnyville AB

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,855
Reaction score
10,130
Location
Cold Lake, AB
,
ktm 450 exc 245lbs dry, timbers led kit front and rear 135lbs. Minus weight of tires, swing arm, etc I would say in the area of 360ish (ready to ride) x 5 = 1800lbs....
Would be legal on a 3500. Even after adding another 1300lbs of guys and gear.
 

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,855
Reaction score
10,130
Location
Cold Lake, AB
it would be interesting loading the outside bikes long way down to the ground
I load up to 4 dirt bikes on my deck in the summer. I start by riding up in the center, and then kick the bike over to the side and strap it down.
 
Top Bottom