Skidoo 850 Clutch kits - Available soon

[dragonweld28]

I have a few kits out testing with various riders to confirm what I was able to find on the 850 that I owned. Im currently just waiting on a backorder of weights.
Who would be interested in a kit? Feel free to ask me some questions.

 

[Skidoomiles]

What are you selling complete kits for? Are the weights SSI?

 

[dragonweld28]

For the 2017-2020 summit 850. yes those are SSI weigths, magnetic adjustable.

 

[CatAttack900]

I would be interested in a kit.
a few questions: Are you gearing down with the kit or just clutch components?
what track speed you seeing? Stock vs clutched?
any chance you took temps of clutches, stock vs clutched?

what are your results you have accomplished with clutching over stock.

thanks in advance

 

[dragonweld28]

21/53 is the gearing to have. Thats what i tested with.
Stock track speeds on a 165 3" with a 240lb rider in good snow was 63-64 kph. The clutch kit would hold 68-69kph.
I never had an actual temp gun. But you were able to put your hands on the clutches after many hard pulls were the stock set up you couldn't.

To me, the bottom end is way better. Much stronger out of the hole and held rpm better. I also found that the on off throttle response was better.

 

[CatAttack900]

21/53 is the gearing to have. Thats what i tested with.
Stock track speeds on a 165 3" with a 240lb rider in good snow was 63-64 kph. The clutch kit would hold 68-69kph.
I never had an actual temp gun. But you were able to put your hands on the clutches after many hard pulls were the stock set up you couldn't.

To me, the bottom end is way better. Much stronger out of the hole and held rpm better. I also found that the on off throttle response was better.

thanks for the reply, on my expert I held 7900-8000 rpm on most climbs in deep snow but I believe the back shift could be better.

 

[dragonweld28]

That is mostly due to the straight 40 helix. lazy backshift

 

[CatAttack900]

Yeah I don’t know much about skidoo clutching, this is the first skidoo I have ever owned, so any help would be greatly appreciated!! I just know there is always improvements to make over stock clutching

 

[Big A]

Interested, sent you a dm.

 

[Rotax_Kid]

I have a few kits out testing with various riders to confirm what I was able to find on the 850 that I owned. Im currently just waiting on a backorder of weights.
Who would be interested in a kit? Feel free to ask me some questions.

View attachment 221749

Curious...what is the BDX ring for? Is that a seat for secondary spring or primary spring shim?

 

[NoBrakes!]

bearing for smooth shift no?

 

[Caper11]

Yep its called a slick shift Brg.

 

[dragonweld28]

It sits behind the secondary spring to prevent spring bind.

 

[pfi572]

The bearing is a good idea . Dwayne with Hitech Performance uses them on his secondary

 

[catman1]

Any updates on your kit ? Do you install too or just sell the parts ?

 

[dragonweld28]

Just supply the parts. I have the helix's now, but was back ordered on the weights.... so frustrating.

 

[Greg5658]

Does kanedog approve of this clutch kit?

 

[dragonweld28]

For sure not... lol. He's too busy making his sleds slower than stock..

 

[dragonweld28]

I have everything in stock now. Let me know if your looking for one.

Cheers

 

[CJD]

Still have stock? Price?