Ski-Doo XP turbos

[PJtheMunchkin]

I am looking at getting some boost for my 2009 XP 154 and I have been looking at several kits. CPI Racing makes a kit and it seems to include all of the necessary parts and the price is 200-2500 cheaper than the other kits.

I know I may be asking alot here, but I am trying to obtain non-biased information and opinions on this kit. I am not interested in bashing so please don't start it.

Here is the parts list:
Turbo Fittings

1 – Garret Turbo (2560)
1 – Charge Tube Fitting
1 – Oil Drain Tube Fitting
2 – Water Aluminum Fittings
5 – 8mm x 1.25 Bolts
5 – 8mm Lock Washers
5 – 8mm Flat Washers
1 – 1/8” Street Elbow
2 – 3/8” x 3/8” MP Fuel Line Barb
2 – 8mm Button Head Bolts
3 – 8mm Allen Head Bolts
1 – Stainless Steel Line
1 – 1/8” x 4 AN Fitting
1 – 1/8” Street “T”
1 – Pressure Sensor
1 – 3/16 Fuel Barb x 1/8 MPT

Oil Tank
2 – 8mm – 1.25 x 40mm Bolts
3 – 8mm Flat Washers
1 – 8mm Lock Washer
1 – 8mm Flat Strap Spacer
1 – 8mm Round Spacer
1 – ¼” x 1/8 Fuel Barb
1 – 2 inch 1/2 inch Heater Hose
1 – 8 ½ Inches Long ¼ Inch Black Fuel Line
2 – 8 to 10 Hose Clamps

Air Box
8 – 1/8” barb x 10-32 MT Fittings
1 – ¼” x 1/8” MP Fuel Line Barb
2 – Power Jets
4 – 50-76mm Hose Clamps
2 – 2 1/2” x 1 3/8” Rubber Tube

Air Intake Box
1 – Aluminum Box
1 – Aluminum Bracket
1 – Screen Mesh
11 – ½” Screws
1 – Chrome Intake Tube
1 – 2 1/4” x 6” Hose
2 – 50-76mm Hose Clamps



Boost Controller
1 – 8mm x 1.25 Bolt
2 – ¼” x 3/8” MP Fuel Line Barb
1 – 8mm Nut


Charge Tube
1 – Chrome Tube
2 – 90 Degree Hose
4 – 33-57mm Hose Clamps


Fuel Pressure Regulator
1 – Regulator
3 – 5/16” x 3/8” MPT
1 – 3/8” x 1/8” Bushing
1 – 1/8” 90 Degree Street
1 – 3/16” x 1/8” MPT Fuel Barb
1 – 3/8” Square Head Plug
2 – Round Spacers
2 – 5mm Allen Head Bolts

Boost Gauge Controller
2 – Boost Gauges
1 – Aluminum Face Plate
6 – Pop Rivets
2 – 1/8” x ½” Coupling
2 – 1/8” x 1/8” Fuel Barb Line
2 – Aluminum Flat Strap for Pop Rivets
1 – Warning Light

1 – Oil Pump
2 – ¼” x 1/8” MP Fuel Barb
2 – Rubber Clamps for Oil Pump
1 – Fuel Pump
2 – Rubber Clamps for Fuel Pump
4 – Pop Rivets
1 – Turbo Pipe
1 – Turbo Muffler
4 – Carb Fittings 1/8” Barb x 10-32 MT Fitting
1 – Wiring Harness
15 – Feet 1/8” Clear Fuel Line
5 – Feet 5/16” Clear Fuel Line
1 – DPM Fuel Line Plug Aluminum
2 – 1 ½” Feet ½” Heater Hose
1 – 2 Feet ¼” Heater Hose Line
1 – Aluminum Hose Plate

 

[snotterite]

FAB SELLS A TURBO KIT...BUT YOU HAVE TO PAY YOUR BET FIRST!!!

 

[PJtheMunchkin]

I will, Everytime I get a bit of time something happens. This week my wife had a stroke. Just got home from the hospital.

 

[Washy]

Take a look at Turboboyz they use the aerocharger turbo, variable vane for super fast spooling and no oil or coolant lines to deal with.

 

[dooryder]

I will, Everytime I get a bit of time something happens. This week my wife had a stroke. Just got home from the hospital.

dude that sucks, hope she gets well sooon

 

[PJtheMunchkin]

Take a look at Turboboyz they use the aerocharger turbo, variable vane for super fast spooling and no oil or coolant lines to deal with.

Yep, I have been looking at them. But 4000 bucks is way less than 6500 bucks!
That is why I'm trying to shop, compare and get other's takes.

BTW, wifey is doing much better. Almost back to normal, she started b*tching at me today.:d:d

 

[glengine]

I hope she has a speedy recovery.. I've installed a few of turboboyz kits. In the list it doesn't seem like they have enough of the 1/8 barb fittings.. Off the top of my head i can think of like 15 that you'd need. there are several that you need to balance out the pressure inside the carbs. i beleive i have some pics of the turboboyz turbo kit installed on an XP in my photo album on my profile, if not Pm me and i can send you some pics.

 

[maxwell]

ive ran one of those turbo boyz kits. IM ASSUMING as specialty sleds installed it. not for me but for a friend. was rediculous. just had to change his main jet as he was getting lean above 3/4 throttle.

also if you turbo your xp plan on spending the extra $$ on a timbersled skid or something along those lines. as you wont be able to keep it climbing and it will just trench like mad.

 

[glengine]

Which one was that?

 

[maxwell]

my friend from loyd minister. turbo 2008 xp with aerocharger. so im assuming thats the turboboyz kit?

hauls ass but hard to keep it going uphill in the deep with the stock track and skid.

 

[glengine]

Ah.. Was just wondering because i built a few of those when i worked at specialty sleds.

 

[Absolute Power]

We did two Boostwurx kits in Loyd. Kits assembled in Alberta sold at APP and supporting dealers. Price reflects how they work. Tech support is here,in Alberta. You know the saying, you get what you pay for. Look up the kits on our web site in the showcase gallery. $6995.00 Intercooled turbo kits with the 53 Aero, 66 available for $7495.00 I can give testimonials THEY WORK!!

 

[glengine]

We will have XP turbo kits available this year.. They will be able to be installed and tested before you pick them up and we'll be able to go up the hill with you to help you learn the tuning aspect of things as we live right at the hills.. We will also have very competetive pricing..