Silbers 850 turbo kit could be the answer..

[Director]

Why are you running 391's? Use the 531 or try the new 571 belt.

I was wrong..
NM - i've got 2 - 531's to blow and then on to the 571..

 

[turboetech]

Sounds like you need a clutch/motor mount alignment way cheaper than keep buyin belts at 220$ a pop

 

[skegpro]

I was gonna say I got to ride the redline extreme output 850 at 12psi and there was zero holding back and no belt issues.

But to be fair that has the p85 in it.
Dave said it hadn't blown a belt in over 2000km.....

 

[turboetech]

Don’t get me wrong but I’m sure these silber kits can be turned up to 10 psi boost and run as well just ask Jay Mentaberry the hill climb camp last year.... 600 Kms set at 5 psi puts a grin on my face let alone 10 psi

 

[skegpro]

Why am I seeing videos of guys' cats loading up bad on the bottom end with the silber kits?

They have control of the factory injectors can't they just pull more fuel?

 

[mountainsledmania]

Why am I seeing videos of guys' cats loading up bad on the bottom end with the silber kits?

They have control of the factory injectors can't they just pull more fuel?

Im gunna call FAKE NEWS on this post. Silber has their tuning on point.

 

[snopro]

Im gunna call FAKE NEWS on this post. Silber has their tuning on point.

 

[skegpro]

Im gunna call FAKE NEWS on this post. Silber has their tuning on point.

There was a video in turbos only on Facebook, I'll see if I can find it for you.

 

[mountainsledmania]

if in fact it is true, then theirs an issue with that specific sled. Khan is running a silber kit on his alpha, you wouldn't see him sending it over huge cliffs if it had a burble on the bottom. again silbers tuning is on point.... customer service not so much... but the tuning is there.

 

[skegpro]

if in fact it is true, then theirs an issue with that specific sled. Khan is running a silber kit on his alpha, you wouldn't see him sending it over huge cliffs if it had a burble on the bottom. again silbers tuning is on point.... customer service not so much... but the tuning is there.

Must be the case, guy is probably running **** fuel or something.

 

[turboetech]

Wpm in westlock ab are a good source..... Scott is their Machanic installing these silber turbos... good guy if you need service or troubleshooting

 

[skegpro]

Wpm in westlock ab are a good source..... Scott is their Machanic installing these silber turbos... good guy if you need service or troubleshooting

So do they still warrenty their sleds with the turbo?

 

[turboetech]

No idea I have not gone down that road yet.....

 

[skegpro]

No idea I have not gone down that road yet.....

I was wondering that at the sled show.
With sliber hanging out right in the wpm booth and then the doo guys hanging out in the Martin's booth. So obviously not much of a secret.

 

[turboetech]

All about sales man and from what I have heard it was a record year for silbers crew

 

[chickenman]

I think the simplicity of the kit and having a great brand ambassador like Chris Brown is key to success of the kit. Especially up here in Canada. Not having to ship cross boarders is a huge thing! Having said that, I checked out the Ride Whistler site and he’s selling the BD kits on there now. Wonder if his buddy Burandt got him to justo ship?

 

[was1]

Nope, chris is done with silber, will leave it at that. Boondocker is what he is using now and no, burandt had nothing to do with it!

 

[skegpro]

Nope, chris is done with silber, will leave it at that. Boondocker is what he is using now and no, burandt had nothing to do with it!

Why did he switch?
Spill it.

 

[turboetech]

To increase boondockers sales..... lol.... as if

 

[mountainsledmania]

Nope, chris is done with silber, will leave it at that. Boondocker is what he is using now and no, burandt had nothing to do with it!

go on.... when you make a post like that u better be ready to spill the beans.