Robbed of Power

dooryder

XP V.I.P. Member
Joined
Nov 9, 2007
Messages
4,072
Reaction score
98
Location
Blue river/ edmonton
dont assume, you make an ass out of you and me ( if you get the saying)

brand new machine or not, there is always problems with a machine no matter brand or model, and i dont see where he says he replaced any clutching components or parts, PLEASE fill me in?
 

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,105
Reaction score
43,347
Location
Sherwood Park, Alberta, Canada
yah i get it lol

when he says "ITS NOT CLUTCHING"

what does that say to you? he hasnt ruled that out? i think thats what hes saying.

explain to me how a sacked secondary spring would create a instantanious bog when he hits the bottom of the hill at full throttle. the machine is already HIGHLY loaded since its a DEEP powder day
 

shoppingcart111

Active VIP Member
Joined
Sep 21, 2007
Messages
1,685
Reaction score
559
Location
Edmonton
Thanks for fighting for me guys lol, even though I haven't checked the clutching IT IS NOT the clutch, this is a fuel related issue cause I've felt it before on my old sled which was jetting, so this might be a DPM fault or pinched lines etc, the dealer wants to send me to the hills with a new DPM and new ECM and dess cord to try. I'm just trying to get it rectified before the season casue I dont want to change a dpm or ecm on the hill.
 

glengine

Active VIP Member
Joined
Jan 1, 2008
Messages
3,724
Reaction score
1,160
Location
Smithers, B.C.
have you ever had your airbox that the headlight hooks to off? As i've seen a couple where the hose for the dpm that hooks to the airbox comes out and then the dpm will not work properly. I've also seen where the solenoid for the dpm doesn't work properly so you can pull the dpm out and just put 12v power to it and feel if it clicks. If it clicks then it's working.
 
Last edited:

maxwell

Active VIP Member
Joined
Apr 25, 2007
Messages
20,105
Reaction score
43,347
Location
Sherwood Park, Alberta, Canada
have you ever had your airbox that the headlight hooks to off? As i've seen a couple where the hose for the dpm that hooks to the airbox comes out and then the dpm will not work properly. I've also seen where the solenoid for the dpm doesn't work properly so you can pull the dpm out and just put 12v power to it and feel if it clicks. If it clicks then it's working.


LOL thats what happened to me. solenoid was NOT working trouble shot that over the phone with glen.

however that created a different scenario then your describing. more of a cutout than a bog.

but yeah i would be leaning towards/computer/dpm
 
Top Bottom