Random Pictures Thread

WCTHEMI

Active VIP Member
Joined
Nov 30, 2007
Messages
552
Reaction score
470
Location
Lloydminster, Alberta, Canada
Company had 2.5 acres of top soil striped....turning it into a parking lot for more trailers.
Had the first 10 loads of crushed asphalt show up Friday.
Started spreading it around the lot and low and behold my buddy finds a 10mm wrench in this sh!t!
I've got it soaking in WD40, I think it's FUBAR?

Try Kroil or similar. WD-40 isn’t a very good penetrating oil.
 

tejay

Active VIP Member
Joined
Dec 20, 2010
Messages
2,069
Reaction score
8,359
Location
stoke
Northern lights just before dawn from Boulder looking towards the dam
70F5ED60-9DFC-4693-8677-FCDC6B419BBB.jpeg
 

RXN

Active VIP Member
Joined
Feb 26, 2009
Messages
7,150
Reaction score
38,136
Location
Gibbons, Alberta, Canada
20211030_193952.jpg

Removed the small cat under seat bag. Built a gas caddy. No more strapping fuel to the boards.
But the tunnel bag was too tight to the jerry can.

20211031_144009.jpg


So by coming up 1" in height. I was able to move the bag back 2" over the tail light.
Unfortunately if I have to show my Vin I'll have to remove my riser.

20211031_144551.jpg


Had a 4x4 sheet of aluminum checker plate. Cut down to size. And mounted the cam posts for the bag.

20211031_144812.jpg
20211031_144818.jpg


Now the shovel neck doesn't rub on the jerry can. Kinda a pain getting through. But Hey. I can carry gas.
 

tejay

Active VIP Member
Joined
Dec 20, 2010
Messages
2,069
Reaction score
8,359
Location
stoke
Didn't you wedge them sideways with cardboard so they would still play??
Well sure but the next step was yanking on the tape trying to get the tape to roll back in which usually failed . That would be followed by the window rolling down and ……. Heave. Let’s not forget the inevitable pulling tape out of the player that is now balled up inside the machine . Good grief what a horrible invention!
 

Stompin Tom

Active VIP Member
Joined
Jun 7, 2009
Messages
3,787
Reaction score
8,138
Location
BC
Well sure but the next step was yanking on the tape trying to get the tape to roll back in which usually failed . That would be followed by the window rolling down and ……. Heave. Let’s not forget the inevitable pulling tape out of the player that is now balled up inside the machine . Good grief what a horrible invention!
still worked better than why they tried turntables in cars
 

Scrambled

Active VIP Member
Joined
Mar 3, 2009
Messages
1,122
Reaction score
2,603
Location
Nanoose Bay B.C
Do you need a different remote for that,one with toggles or dual wheel, haven't personally seen a rear steer RC rock crawler
 
Top Bottom