Random Pictures Thread

WCTHEMI

Active VIP Member
Joined
Nov 30, 2007
Messages
552
Reaction score
470
Location
Lloydminster, Alberta, Canada
a32369ab7feb699abec98e35bcc87445.jpg
 

Cdnfireman

Active VIP Member
Joined
Sep 11, 2012
Messages
2,726
Reaction score
9,529
Location
Alberta
I see lots of those at auctions. Chinese made I think. Are you happy with the quality? Any problems putting it up?
 

Trashy

Super Moderator
Moderator
Joined
Nov 16, 2008
Messages
132,823
Reaction score
105,498
Location
Fort Macleod
I see lots of those at auctions. Chinese made I think. Are you happy with the quality? Any problems putting it up?
Yes Chinese made and from ClubBid
It's only been up for 2 days, but yes liked the piping and material so far.
The forklift was a major asset, I spent a lot of time on a pallet in the air. With forklift, 4 guys a solid day and a half.
Being built on level ground would make a huge difference. It was very hard to square it all up on loose recycled concrete. But once we had it square, life got better.
 

Cyle

Active VIP Member
Joined
Jan 21, 2008
Messages
7,182
Reaction score
4,762
Location
edmonton
I have same one been up since october, they are ok but you constantly need to re-tighten them. Although we've had some crazy winds. The main canvas is easy with ratchet straps, the annoying part is the ends being laced. I built wood doors for one side, going to frame in rest of both ends in wood to avoid that. It's really cheap dry place for stuff, and in a pinch to work on stuff in the winter you can heat them somewhat decently to work on stuff. IMO for like the $2000 I paid can't complain about a 30x40 building.
 

Beer Slayer

Active VIP Member
Joined
Dec 2, 2018
Messages
1,417
Reaction score
3,441
Location
Great Lakes
Can you rent a stump grinder?
Dynamite?


I have access to a small stump grinder...BIL runs a Stevenson's Rental. Don't think it will work?? Right now I'm diggin' out the stones/dirt the best I can and chain sawing/saws-all chunks out, repeat. On the second chain. Spend more time sharpening than cutting.
The hole I've dug is almost two feet deep in front of the stump. The roots only grew down so far [bedrock perhaps?], then started growing up/out of the ground years later. This Elm tree has lifted my garage pad 4 inches in one corner and the fence about 6 inches. Trying to reclaim this area for the Ol' doll. I'll back fill with a-gravel when done.

Dynamite would be excellent for entertainment! Maybe, if I didn't have neighbours or other sh!t in the way I'm tryin' to salvage. :)
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
109,902
Reaction score
108,756
Location
Milo,Alberta
I have access to a small stump grinder...BIL runs a Stevenson's Rental. Don't think it will work?? Right now I'm diggin' out the stones/dirt the best I can and chain sawing/saws-all chunks out, repeat. On the second chain. Spend more time sharpening than cutting.
The hole I've dug is almost two feet deep in front of the stump. The roots only grew down so far [bedrock perhaps?], then started growing up/out of the ground years later. This Elm tree has lifted my garage pad 4 inches in one corner and the fence about 6 inches. Trying to reclaim this area for the Ol' doll. I'll back fill with a-gravel when done.

Dynamite would be excellent for entertainment! Maybe, if I didn't have neighbours or other sh!t in the way I'm tryin' to salvage. :)
See Tannerite thread. Lol
 

doorfx

Active VIP Member
Joined
Jan 10, 2011
Messages
10,050
Reaction score
24,523
Location
calgary ab
Yes I’ve used a stump grinder on an oak stump and it worked. It’s hard work till you get the hang of it. Don’t try to take too big of bites.
Google a couple of stump grinding videos.

https://youtu.be/Y3h4n4f2_Y8
 

Bernoff

Active VIP Member
Joined
Mar 11, 2010
Messages
1,386
Reaction score
1,338
Location
Edmonton
Hey Guys what is this for? Was cleaning up a garage and came across some of these. Says 10W on top of can. Is it useable?
 

Attachments

  • DSCN2749.jpg
    DSCN2749.jpg
    130.5 KB · Views: 189
  • DSCN2748.jpg
    DSCN2748.jpg
    84 KB · Views: 189
Top Bottom