Racers edge rails fit on m-10 skid ?

[Woodsie1984]

Anyone know if the racers edge rails will fit on a m-10 skid ? Thinking of going from 163 to 174 and hoping to just change out the rails. Cr racing doesn’t have any 174 rails and not sure if he will get any more in he said. Thanks

 

[Woodsie1984]

I can’t find any info anywhere. Been trying to compare pictures of the internet but hard to tell. They look the same and I have the B-motion rear arm on my m-10 skid already. Not sure what the difference is.

 

[ctd]

A factory M-10 163 is a live axle, is that what you mean B-motion? If it is, the M-10 174 from Fast is not a live axle. Contacting Fast directly if you have the real deal & Gerrard will figure out a bolt in setup.

Racers Edge is not compatible.

 

[Woodsie1984]

Not sure what you mean by live axle sorry. This is my current set up m-10 skid with the t-motion rear arm from racers edge( I thought racers edge called it b-motion). I bought the skid already set up with racers edge rear arm in it.

 

[ctd]

What you have is "not" an M-10, big difference. Nothing from a Fast M-10 will work or is compatible. Try Racers edge for rails & if compatible to what you have. Maybe easier just add rail extensions.

 

[Woodsie1984]

What you have is "not" an M-10, big difference. Nothing from a Fast M-10 will work or is compatible. Try Racers edge for rails & if compatible to what you have. Maybe easier just add rail extensions.

ok thanks very much. Always thought the Cr set up was referred to as m-10 suspension my bad. Thanks for the reply appreciate it

 

[snopro]

Phone Darryl at Racers. He can help you. 403-254-8686

 

[Woodsie1984]

Got a hold of Darryl today. His rails are different but he’s going to see if he can find a way to help me out.