quick question for you guys

[tnt-salvage]

i have a customer who owns a 2005 800 summit. his buddy smashed it beyond repair. so i was wondering or want to confirm if you can use the 800 ho engine in a 2007 800r chassis? i recall being told you cant? but just wanted to make sure before commiting to this job.

thanks

 

[MK4TDI]

As far as I know you can't. The wiring and rave valves are setup different.


Sent from my Shoe Phone

 

[tnt-salvage]

thanks for the reply, that makes total sense. i should have been more clear on the question. i plan to strip everything off the 07 chassis till its a bare tunnel bulk head with front suspension. then remove all electronics, engine, ect from the 2005 and install those parts on the 07 chassis.

 

[MK4TDI]

Doing it that way in theory should work, I don't have a whole pile of experience with the REV's to know all the little differences between the years. The 07's have a little different set-up with the motor mounts but the 05 should bolt right onto the 07 plate.


Sent from my Shoe Phone

 

[boots]

Just as long as the engine mounts are the same there is no reason it wouldn't.


Sent from my iPhone