Pre-season Maintenance

Swiper

Active member
Joined
Aug 22, 2010
Messages
59
Reaction score
12
Location
Strathcona County
Just wondering what you all do for pre-season maintenance.
There is a list of things in the service manual that they want done every year like chain case oil and fuel filter Etc.
I am all about preventative maintenance but some of that stuff might be over doing it every year.
 

BC Sno-Ghost

Active VIP Member
Joined
Feb 15, 2009
Messages
1,238
Reaction score
444
Location
Kelowna
What little I can do myself. Definitely chain case oil. Check the belt and clean up the clutches. Check or replace plugs. Track tension and alignment. Ski alignment. Grease. Just make sure everything is tight. Polish at least 6 times. Sit on and pretend a few times....good to go!:beer:
 

rusty

GBCA Member
Joined
Nov 25, 2007
Messages
2,857
Reaction score
582
Location
in my garage
i'm of the opinion that you should go above and beyond specs... check and recheck. with a clipboard,lol do everything they want you too. helicoptors are not cheap..imo
 

TABSTER

Active VIP Member
Joined
Apr 2, 2007
Messages
1,847
Reaction score
273
Location
Saskatoon SK
i'm of the opinion that you should go above and beyond specs... check and recheck. with a clipboard,lol do everything they want you too. helicoptors are not cheap..imo

My towing fee is on par with the helicopter companies..........:eek::d
 

belch22

Active member
Joined
Jan 24, 2010
Messages
75
Reaction score
4
Location
Sask
What little I can do myself. Definitely chain case oil. Check the belt and clean up the clutches. Check or replace plugs. Track tension and alignment. Ski alignment. Grease. Just make sure everything is tight. Polish at least 6 times. Sit on and pretend a few times....good to go!

X 2 .....bbrraaaapppp bbrraaaapppp
 

007sevens

Active VIP Member
Joined
Nov 24, 2009
Messages
20,973
Reaction score
16,991
Location
At my Place in Alberta
I just do this! Always works for me
 

Attachments

  • Silver.JPG
    Silver.JPG
    42.2 KB · Views: 309

TravisFader

Active VIP Member
Joined
Aug 26, 2009
Messages
281
Reaction score
6
Location
VegrEVILle
I usually get a new belt and rotate the one i had on, onto the spare. Cleaning the clutches with an sos pad seemed to be a good idea when i did it, helped with the grip. Check plugs. I spent this pre season putting the sled back together after the trees jumped out in front of me last year.
 

sledslut

Active VIP Member
Joined
Jan 2, 2009
Messages
1,022
Reaction score
60
Location
Calgary, ab
Clean clutches, take it appart and give it a good cleaning. re surfface the faces. give the motor and engine area a good engine shampoo.

new belt.
grease the rear skid and make sure no broken parts.
grease the front suspenson.
remove chain case cover and inspect chain for cracks or broken teeht ( except cat )
cat - gear drive check it.
run up the motor for a bit. get the fuel moving throught it.
change plugs,
clean carbs if needed.



p.s. mothers hot rims in the pink bottle works awesome for cleaning clutches and a good parts cleaner brush.. will make them brand new.. but IT WILL EAT ANYTHING!!!! plastic. coated bolts ect. so be carefull.
 

Swiper

Active member
Joined
Aug 22, 2010
Messages
59
Reaction score
12
Location
Strathcona County
Thanks guys

Now I just have to decide if i should just drain the chain case or or pull the cover.


Is there anyway to clean the carbs without taking them off and apart?
I think I know the answer to this one.
 

RMK Junky

Active VIP Member
Joined
Mar 15, 2009
Messages
3,258
Reaction score
1,044
Location
Grande Prairie AB.
Website
www.snowandmud.com
Thanks guys

Now I just have to decide if i should just drain the chain case or or pull the cover.


Is there anyway to clean the carbs without taking them off and apart?
I think I know the answer to this one.

Best to take them off...yes. Inspect slides, clean seddiment bowls, inspect boots for cracks, and have a boo at the reeds too :d
 

4x4racing

Active VIP Member
Joined
Jun 6, 2010
Messages
524
Reaction score
342
Location
airdire alberta
i got a guy in calgary to do both of mine i always done my own but for 200$ a pice and a really good job very professional and in a timely matter wasn't wrorth me doing it my self extremely happy
 

Flatlander_01

Active VIP Member
Joined
Feb 15, 2009
Messages
340
Reaction score
294
Location
Grande Prairie
take off all the ol ladies garbage that she has piled on it over the summer check for a mouse nest make sure hot dogger dosen't have last rides dinner in it, replace hot dogger make sure sexy lady decal is still attached 100% , ride up and down lawn a few times put back in garage and wait for snow.
 

Swiper

Active member
Joined
Aug 22, 2010
Messages
59
Reaction score
12
Location
Strathcona County
i got a guy in calgary to do both of mine i always done my own but for 200$ a pice and a really good job very professional and in a timely matter wasn't wrorth me doing it my self extremely happy

I would like to find somebody around here to do it for that kind of price.

The dealer wants $350 to do it.

I do not even know if it needs to be done the machine has low km's.
 

007sevens

Active VIP Member
Joined
Nov 24, 2009
Messages
20,973
Reaction score
16,991
Location
At my Place in Alberta
take off all the ol ladies garbage that she has piled on it over the summer check for a mouse nest make sure hot dogger dosen't have last rides dinner in it, replace hot dogger make sure sexy lady decal is still attached 100% , ride up and down lawn a few times put back in garage and wait for snow.

Heard That done that LOL BaWahahahahahaha
 

ridealaska

Member
Joined
Apr 22, 2010
Messages
20
Reaction score
0
Location
Petersbug, Alaska
I would like to find somebody around here to do it for that kind of price.

The dealer wants $350 to do it.

I do not even know if it needs to be done the machine has low km's.

Always best to do some preventive mantenaince after the machine has been sitting all summer, no matter the kms/miles.
 

Barnes

Active VIP Member
Joined
Oct 12, 2010
Messages
214
Reaction score
43
Location
Morinville
Top up Oil, Change chaincase fluid, check brake fluid, check belt and hoses, clean clutches, inspect skid and track, replace worn stopper straps, grease skid and chassis, inspect skis and runners, replace worn broken and worn runners, and of course fill up with fuel ready for first ride. I'm about half way though this list and i'm sure i'll find more.
 

Brians04

Member
Joined
Nov 7, 2010
Messages
10
Reaction score
0
Location
Washington
Even for those not very mechanical i would say to just look at it and see if anything seems broken or out of place, and if your not sure find someone to help.
Personally i go through all (7, yes 7) in the family, check over all susp. parts, grease, check carbides, toe, make sure all the electrical parts are working (lights, hand warmers, key sw., kill switch, etc) run it for a while to get some fresh fuel in the carbs, wash/wax and polish the tunnel.
Now if the snow will show up...
 

rtk

Active member
Joined
Dec 8, 2007
Messages
86
Reaction score
33
Location
St Albert alberta canada
I have made a habit of doing most of the things listed here and in 15 years of cleaning carbs have not found any blockages in the pilot or main jets until this year. It pays to check before riding
 
Top Bottom