Power Madd risers

[murph]

Looking at Power Pivot Riser and riser block.....

Looks like you could bolt 7/8 tube in stock handlebar clamps and then bolt riser to that 7/8 tube--eliminating the need for the pivot adapter and keeping the ability to pivot riser on the 7/8 bar stock. Anyone tried this? Is there interference?

Thanks

 

[apex69]

check out rox risers they work well

 

[Hillclimber]

check out rox risers they work well

I just installed some on my rev waiting to test them out.


Let it snow

 

[apex69]

I just installed some on my rev waiting to test them out.


Let it snow

i did 3.5s on my apex there sweet

 

[Hillclimber]

i did 3.5s on my apex there sweet

i went with 2 so i didn't have to get longer cables

 

[Modman]

Looking at Power Pivot Riser and riser block.....

Looks like you could bolt 7/8 tube in stock handlebar clamps and then bolt riser to that 7/8 tube--eliminating the need for the pivot adapter and keeping the ability to pivot riser on the 7/8 bar stock. Anyone tried this? Is there interference?

Thanks

Yep, you could probably make it work. I just did something similar on another sled, just had a 7/8" roundbar chunk about 6" long welded into the place of the original bar mounts and then mounted risers to that. Here is a pic, took a 6" piece of solid alum roundbar and welded it into the cradle of the old bar. The old bolts used to go through the top caps and down to the steering stem to clamp the bar, I just drilled and tapped them and bolted from the bottom up with socket caps.

 

[KORE]

thats funny Modster! I just did exactly that, also did it on the '96 summit... works just fine!

 

[Modman]

thats funny Modster! I just did exactly that, also did it on the '96 summit... works just fine!

Great minds think alike!!!