ordered a new sled trailer

[-lenny-]

Where's those pics fred? Sounds like its a pretty shwanky rig!

 

[New_M7_Ryder]

Fred that thing is a beauty. Just saw it. This is defiantly one of nicest trailers I have seen.

Jeff

 

[fredw]

well trailer is in the driveway, looking even better than what i thought it was going to, want to give Houston at Precision Rv a big thumbs up, i was supplied a trailer very close to my quote and quality seams to be great, pulled it down the hiway tonight at 100mph empty and no sway are bounce...

from starting at the outside in the front we went with a three foot chrome splash guard for rocks, electric jack, outside 110v power access, along with Aluminium trim below and above, with rivetless and seamless pannels between, two 5100lb axles, on Aluminium rims and 15 inch wheels, also have fuel doors and access fill to underbed fuel tank, new style pin led lighting, larger man door with inside latch, trailer under neath is rockguarded and all four sides of the trailer are insulated

inside the trailer is 3/8 plywood with 1/4 inch white vionel and has a full width of stainless steel surface cabnets, 20"x20" with large door openings, center of cabnets has a 40000 btu heater that uses the lower cabnets for ducking its air to front/back of trailer, back cabnet has inside fuel caddy with hose meter and fuel gun, under rear of trailer is a 40 gallon fuel tank, rear of cabnets also have two lights pointing out for loading, other wall has spare tire with two fold down Aluminium benches, all corners are Aluminium trimed

front nose cone has a stainless steel grill with above vent, 70"x28" ss toolbox mounted, along with corner mini frige, front nose cone has a lcd display with lcd tv and subwoofer, with hdmi and usb ports, other side of nose cone is a workbench with below cabnets for propane, inverter, and four 6 volt batterys, swithching gear for power


inside lighting is all 12v and 110v led pot lighting that can both be used at the same time, along with 110v outlets, floor is wood with fullfloor tracking to tie sleds down

waiting on a few parts to show up, but almost complete, it does not look cluttered or busy, every thing is neat and tidy.... thanks again

 

[snopro]

well trailer is in the driveway, looking even better than what i thought it was going to, want to give Houston at Precision Rv a big thumbs up, i was supplied a trailer very close to my quote and quality seams to be great, pulled it down the hiway tonight at 100mph empty and no sway are bounce...

from starting at the outside in the front we went with a three foot chrome splash guard for rocks, electric jack, outside 110v power access, along with alunimum trim below and above, with rivetless and seamless pannels between, two 5100lb axles, on alunimum rims and 15 inch wheels, also have fuel doors and access fill to underbed fuel tank, new style pin led lighting, larger man door with inside latch, trailer under neath is rockguarded and all four sides of the trailer are insulated

inside the trailer is 3/8 plywood with 1/4 inch white vionel and has a full width of stainless steel surface cabnets, 20"x20" with large door openings, center of cabnets has a 40000 btu heater that uses the lower cabnets for ducking its air to front/back of trailer, back cabnet has inside fuel caddy with hose meter and fuel gun, under rear of trailer is a 40 gallon fuel tank, rear of cabnets also have two lights pointing out for loading, other wall has spare tire with two fold down alunimim benches, all corners are alunimum trimed

front nose cone has a stainless steel grill with above vent, 70"x28" ss toolbox mounted, along with corner mini frige, front nose cone has a lcd display with lcd tv and subwoofer, with hdmi and usb ports, other side of nose cone is a workbench with below cabnets for propane, inverter, and four 6 volt batterys, swithching gear for power


inside lighting is all 12v and 110v led lighting that can both be used at the same time, along with 110v outlets, floor is wood with fullfloor tracking to tie sleds down

waiting on a few parts to show up, but almost complete

See what happens when Canola goes to $14? Lol.

 

[fredw]

few more

 

[fredw]

and the last few

 

[snopro]

and the last few

Is that a particle board floor Fred?

 

[thegeneral]

Wow, I love shiny things!!!!!!!!!!! thats a very nice trailer!

 

[rsaint]

Beauty of a trailer except for the floor.

 

[maxwell]

thats not particle board. same stuff legend uses i beleive. has a 25 year warranty very tuff stuff.


beautiful trailer fred. no expenses spared it looks like.

 

[fredw]

not sure what the floor is but seen this floor on other trailers and looks good year after year, 25 year warrenty... harder than hell to screw into

Is that a particle board floor Fred?

 

[tukernater]

Yep Very nice Fred.

 

[sledhead800]

very nice setup!!!!!!!!!!

 

[Lightningmike]

Super nice indeed!!

 

[Firefly]

thats not particle board. same stuff legend uses i beleive. has a 25 year warranty very tuff stuff.


beautiful trailer fred. no expenses spared it looks like.

Correct Maxwell,

It's called Advantech or Engineered Flooring. Super strong and lowest water adsorption plywood on the market today.

Congrats on the new trailer Fredw!

 

[schiermnultra]

pretty sweet trailer. are you sponsored by areocharger?

 

[DaveB]

No pizza oven? (met "Chubby" from SW down in Cooke a few years ago...his super-trailer had a pizza oven, LOL)

Sweet trailer Fred!

 

[John Boy]

Nice rig, Will be giving them a call for sure.

 

[thegeneral]

only thing it seems to be missing is the turkey fryer lol After seeing this I am rethinking the need for the front ramp on my next trailer.

 

[A.B Plastics]

Gator Guides. A must for your carbide skis