Oil dripping 2018 850’s?

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,577
Reaction score
86,609
Location
beautiful, downtown Salmon Arm, BC
I went for my first ride and then pulled the pipe, suitcase, etc.. There was oil splattered all over the belly pan below the Y-pipe. As mentioned above, blowing out of the gasket between the pipe and the Y-pipe. Not a big deal and probably quite normal.
 

Cat401

Active VIP Member
Joined
Dec 27, 2008
Messages
3,115
Reaction score
8,290
Location
Waskatenau, Alberta
I went for my first ride and then pulled the pipe, suitcase, etc.. There was oil splattered all over the belly pan below the Y-pipe. As mentioned above, blowing out of the gasket between the pipe and the Y-pipe. Not a big deal and probably quite normal.

Seriously?.........You guys are ok with this and find this acceptable?........Really

I have an old 2003 FireCat that does this once in a while...it pizzez me off .......but its 15 years old! For you guys to have a brand new 2018 BRP splattering oil around the engine area and piddling on the floor is deeming it acceptable kinda shows how drunk you guys are on doo-tang...YIKES
 
Last edited:

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,577
Reaction score
86,609
Location
beautiful, downtown Salmon Arm, BC
I went for my first ride and then pulled the pipe, suitcase, etc.. There was oil splattered all over the belly pan below the Y-pipe. As mentioned above, blowing out of the gasket between the pipe and the Y-pipe. Not a big deal and probably quite normal.

Seriously?.........You guys are ok with this and find this acceptable?........Really

I have an old 2003 FireCat that does this once in a while...it pizzez me off .......but its 15 years old! For you guys to have a brand new 2018 BRP splattering oil around the engine area and piddling on the floor is deeming it acceptable kinda shows how drunk you guys are on doo-tang...YIKES

I think there should be a better way to seal those puppies other than the donut they have been using for years. I guess I have grown used to it and some years have more oil than others. This just happens to be one of those years with too much oil (I don't have oil dripping out on the floor tho'). I can think of a lot of other things that would p*ss me off more.
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,600
Reaction score
46,709
Location
BC
I think there should be a better way to seal those puppies other than the donut they have been using for years. I guess I have grown used to it and some years have more oil than others. This just happens to be one of those years with too much oil (I don't have oil dripping out on the floor tho'). I can think of a lot of other things that would p*ss me off more.


all this new tech and none is applied to sealing the pipe...all OEM's are guilty
 

MarkCos

Active VIP Member
Joined
Nov 26, 2011
Messages
699
Reaction score
1,237
Location
So
Sweeeet
lets drip oil all over the mountains when we rip
thanks brp

this ride meet the epa check to ? . Lol
 

snochuk

Active VIP Member
Joined
Nov 9, 2006
Messages
6,217
Reaction score
20,319
Location
Edmonton
I went for my first ride and then pulled the pipe, suitcase, etc.. There was oil splattered all over the belly pan below the Y-pipe. As mentioned above, blowing out of the gasket between the pipe and the Y-pipe. Not a big deal and probably quite normal.

Seriously?.........You guys are ok with this and find this acceptable?........Really

I have an old 2003 FireCat that does this once in a while...it pizzez me off .......but its 15 years old! For you guys to have a brand new 2018 BRP splattering oil around the engine area and piddling on the floor is deeming it acceptable kinda shows how drunk you guys are on doo-tang...YIKES

Well we could start a "Problems with the 2018 G4" but we all know how that turned out with the 2017.
Lots of doolaid tears till it got pulled.
It did however consolidate issues to one thread.
Compared to last year dripping oil for a doo owner is minor.
Besides Daggy said it's OK, video may come out.
Likely go away after breakin. Just messy, at least has no $ impact.
 
Last edited:

iceman5689

Active VIP Member
Joined
Oct 25, 2009
Messages
948
Reaction score
989
Location
Hilltop Mtn
As mentioned previously once heated up and donut swells, the small amount of two stroke break in oil will be eliminated. All I did was sprayed brake clean and let it filter out the belly. Nothing to post a bulletin over.
 

MarkCos

Active VIP Member
Joined
Nov 26, 2011
Messages
699
Reaction score
1,237
Location
So
I heard some doo guyz are stuffing there belly pans
with baby diapers to catch the mess

dave THE “backcountry expert” ,has a brp vid on it to
check it out ,he explained why pampers over huggys are best


lol
 

KingCon

Member
Joined
Feb 12, 2016
Messages
22
Reaction score
93
Location
Wyoming
Took the sled out the other day finally, only got to ride about 30 miles but the oil is still leaking. It is coming from the gasket on the Y pipe. Makes a mess all over the engine compartment. BRP should have a better way to make make this seal.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
109,938
Reaction score
108,782
Location
Milo,Alberta
Took the sled out the other day finally, only got to ride about 30 miles but the oil is still leaking. It is coming from the gasket on the Y pipe. Makes a mess all over the engine compartment. BRP should have a better way to make make this seal.
Have you contacted your dealer? Maybe its missing the seal or needs to be replaced? Possibly damaged when installing a skid plate. Unless your dealer follows you on snow and mud how is he going to know you have a problem?
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Took the sled out the other day finally, only got to ride about 30 miles but the oil is still leaking. It is coming from the gasket on the Y pipe. Makes a mess all over the engine compartment. BRP should have a better way to make make this seal.
Retorque the y pipe bolts?
 

KingCon

Member
Joined
Feb 12, 2016
Messages
22
Reaction score
93
Location
Wyoming
I have talked to the dealer twice about it and they keep saying it is from the factory over oiling during assembly. Don’t know how to get the dealer to believe.
 

snopro

Active VIP Member
Joined
Mar 3, 2009
Messages
109,938
Reaction score
108,782
Location
Milo,Alberta
I have talked to the dealer twice about it and they keep saying it is from the factory over oiling during assembly. Don’t know how to get the dealer to believe.
New dealer will most likely believe you and would be happy with your business.
 
Top Bottom