New ride.

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,785
Reaction score
8,083
Location
Calgary/Nelson
Here is my new ride for this season. I just finished making the chrome windshield. I did not like the stock shield. Anybody else changing out theirs?

I will be adding a white belly pan protector and will update pics as I go. Lets see some other new XP,s and what mods are taking place.
 

Attachments

  • DSC02141.jpg
    DSC02141.jpg
    52.8 KB · Views: 339
Last edited:

JoHNI_T

Active VIP Member
Joined
Apr 18, 2007
Messages
5,717
Reaction score
2,289
Location
Chestermere
nioce

when we going,,, tomorrow is too early right?:d

love the black
 

nuggetau

Member
Joined
Aug 29, 2010
Messages
9
Reaction score
1
Location
Donnelly Idaho
Here is my new ride for this season. I just finished making the chrome windshield. I did not like the stock shield. Anybody else changing out theirs?

I will be adding a white belly pan protector and will update pics as I go. Lets see some other new XP,s and what mods are taking place.


I too went with the white extreme bash plate, I think I'll go with some white extreme air vents to tie together with the plate. I will install a throttle logic LH throttle. Then ride her for a while and see what else I might need and wait for the "beta" testers to try the aftermarket stuff(can, clutching, performance products) to see what works.
 

takethebounce

Active VIP Member
Joined
Dec 10, 2008
Messages
5,193
Reaction score
8,750
Location
calgary
Here is my new ride for this season. I just finished making the chrome windshield. I did not like the stock shield. Anybody else changing out theirs?

I will be adding a white belly pan protector and will update pics as I go. Lets see some other new XP,s and what mods are taking place.



Nice lookin sled, you made your chrome windshield???

I have a chrome one on mine but its gettin kinda bashed. I'd like to know how you made it.

You still have some time before the snow is deep, pull the spindles and rails off and run them over to the powder coater and it will look sawweeeeeeeeetttttt...add white hyfax's to go with your belly pan.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,785
Reaction score
8,083
Location
Calgary/Nelson
Nice lookin sled, you made your chrome windshield???

I have a chrome one on mine but its gettin kinda bashed. I'd like to know how you made it.

You still have some time before the snow is deep, pull the spindles and rails off and run them over to the powder coater and it will look sawweeeeeeeeetttttt...add white hyfax's to go with your belly pan.

I'm considering it. I have a source for chrome plated plastic sheeting. If it holds up in the cold, I will find out. I just cut out with scissors, 3rd time I got lucky with the design.
 

Longhorn

Active VIP Member
Joined
Dec 19, 2009
Messages
3,809
Reaction score
415
Location
Medicine Hat, AB
Website
www.longhornenergy.ca
I hope to be able to add to this thread tomorrow, I plan to pick up mine if I can get done work early enough! I went with the White/Black/Orange one so no orange accessories yet, so I went with a black belly pan protector, and will likely change out the windshield too. Oh ya, added the jerry can as well, need that...

Didnt go with a can, as the MBRP ones are back ordered, and no real testing yet, so suitcase for a bit.
 

underdog

Active VIP Member
Joined
Jan 11, 2010
Messages
21,563
Reaction score
7,174
Location
Carbon AB
Same boat as longhorn here. Except I have it sitting in the garage and ready to go. Just needs a smaller windshield and a can (no body has them yet) And it's ready to go!
 

underdog

Active VIP Member
Joined
Jan 11, 2010
Messages
21,563
Reaction score
7,174
Location
Carbon AB
I'll snap a couple of pics and put it up. Its not my style, but some people like them.
 

08summit

Active VIP Member
Joined
Oct 21, 2007
Messages
1,023
Reaction score
356
Location
Leduc alberta
I hope to be able to add to this thread tomorrow, I plan to pick up mine if I can get done work early enough! I went with the White/Black/Orange one so no orange accessories yet, so I went with a black belly pan protector, and will likely change out the windshield too. Oh ya, added the jerry can as well, need that...

Didnt go with a can, as the MBRP ones are back ordered, and no real testing yet, so suitcase for a bit.



If these machines are as good on fuel as BRP says Longhorn you should never need a jerry can again just extra weight to pack in and out of the trail...Just sayin
 

pipeliner72

Active VIP Member
Joined
Apr 2, 2008
Messages
274
Reaction score
128
Location
Bon Accord ab
I ordered mine with e start does anyone know why the don't put a pullcord on them?I put the gauge upgrade module,fuel caddy,muff pot,heated visor plug in for riser bag i am debating a can it is so quit i and smooth running not sure if i want to.
 

Attachments

  • new sled 007.jpg
    new sled 007.jpg
    66.6 KB · Views: 148
  • new sled 004.jpg
    new sled 004.jpg
    76.3 KB · Views: 156

underdog

Active VIP Member
Joined
Jan 11, 2010
Messages
21,563
Reaction score
7,174
Location
Carbon AB
My buddies 09 600 E-TEC doesn't have a pull chord either. Just electric start. Better hope the battery stays charged haha.
 
Top Bottom