Must haves for a Kingquad 750 ?

Deeter

Member
Joined
Jan 21, 2009
Messages
16
Reaction score
0
Location
Bognor, On
Hey all, I got a 2009 Kingquad 750 (brushed black) and was wondering if anyone can reccomend some things to put on it or do to it. I already have bumpers and a winch.

Thanks
 

dlg27

Active VIP Member
Joined
Oct 17, 2008
Messages
171
Reaction score
26
Location
saskatoon sk
I put some bigger rims and tires. Put a epi clutch kit in which gave it alot better low end. Also put in a lift from xpatv. Fairly cheap and it gives u alot more ground clearance. I also put just a couple other little things like hand gaurds, hand warmers and a twin air air filter
 

Deeter

Member
Joined
Jan 21, 2009
Messages
16
Reaction score
0
Location
Bognor, On
Thanks dlg27. I have Mud Lites on there now (but only stock rims)
 

munhoez

Active VIP Member
Joined
Jan 27, 2009
Messages
4,395
Reaction score
592
Location
In a Dakota R/T, down by the South Sask. River
A lot of guys put on rims w/ their mud tires. If i were u id keep the stock rims(not very heavy compared to the 12' ITP rims) , Epi clutch kit, twin air filter, xpatv lift, 2mm shim mod. And if your courageous or not ,snorkel kit. But it will void your warranty, if a suzuki tech installs. I'd wait till your off warr.(1yr)
 

kavik

Member
Joined
Jul 3, 2009
Messages
22
Reaction score
0
Location
Central BC
Some luggage. While better than some, the King Quad does not have much storage space.
 

QMAO

Active VIP Member
Joined
Jan 1, 2007
Messages
707
Reaction score
376
Location
Central,Alberta
Do the grease zerk mod to the A-arms or else the bushings wear out.
Get a Twin Air filter.
A VDI if you want more power and want to get rid of the limiters!!!
 
Last edited:

feyd

Active member
Joined
Mar 13, 2008
Messages
99
Reaction score
3
Location
Alberta
Where to start?

VDI
Twin Air air filter
EPI or Dalton clutch kit
heated grips
wheels
tires
bumper
Highlifter springs
1.5-2.0" lift kit
Highlifter rad and relocation kit
exhaust
rear box
tow rope
full snorkels
skid plates
another set of wheels and tires
grease zerk mod
front suspension shim mod
clutch kit spacer mod (Coop mod)
 

Deeter

Member
Joined
Jan 21, 2009
Messages
16
Reaction score
0
Location
Bognor, On
I would look at My Mod#3, for your clutch!
This is the best bang for your buck!
If you are interested, check out my Web site!
Thanks
Coop45


Thanks, how difficult are these to install for the not so mechanically inclined ?
I will definately be ordering one of these in the near future.
 
Top Bottom