Must do,s on the t3

[new24stroke]

Hi just purchased a new to me 2015 t3 174. Just a couple things I would like to do. Clutch kit (which one) and doing the billet t-stat. What do you guys suggest

 

[kingcat162]

Ibackshift kit - powderfreaks thermostat - you have to change the primary spring from what they send you tho - I got a kit from them - told them my whole setup - the spring they sent me was way off (too stiff) for the primary - and their recommendation for pin weight was also way off because their primary spring was too stiff

 

[kingcat162]

Do the Munster bushing savers - Munster finger throttle - extended glove box with heated liner - drill holes in the windshield and put longer screws in that thread into the inserts underneath so windshield can never come off - t- motion lockout - rear torsion spring spacers - led headlights - cheetah bars - adjustable riser - doo backcountry front bumper - Smith grade rear bumper - I could list more but start with that lol

 

[tex78]

T3 still needs t motion, unless it's boosted

 

[kingcat162]

T3 still needs t motion, unless it's boosted

Lots of people lock out the T motion on stockers - easy to lock out and try it - if you don't like it take it out - personally I like it locked out - but yes I am boosted

 

[tex78]

Lots of people lock out the T motion on stockers - easy to lock out and try it - if you don't like it take it out - personally I like it locked out - but yes I am boosted

G4 chassis yes, xm no

Xm needs a bit of lean to initiate

 

[kanedog]

Munster ski rubber saver thingies. If none, the rubber will wear quickly and you could get floppy ski syndrome. A fly over the bars scenario could occur.

 

[1100]

The Munster ski bushing things are a must have, couldn’t keep ski rubbers in mine before.

 

[Cableguy]

or grippers for skiis
thats the best option
I prefer tmotion locked out and im not boosted

 

[lilduke]

Shocks. The stock ones suck

 

[kingcat162]

or grippers for skiis
thats the best option
I prefer tmotion locked out and im not boosted

I got a few buddies not boosted with t motion locked out too and they like it way better

 

[ferniesnow]

Just ride the dam thing and enjoy! They were good right out of the box. Clutching a maybe, depending on how you ride.

 

[Ballzdeep]

I don't have a T3 but own a XM FR and love that sled. i put on Powderfreaks T stat and munster brace, ski savers, finger throttle, killswitch. Dyna Joe clutch, not sure what one it is but red springs. Enjoy your new sled, ive heard nothing but positive things about the T3

 

[Bnorth]

I have a Powderfreaks t-stat and DJ T3 clutching for sale if you're interested. Also a 51t bottom gear helps on the 174.

 

[new24stroke]

Bnorth How much are you asking for it all

 

[kimrick]

Just ride the dam thing and enjoy! They were good right out of the box. Clutching a maybe, depending on how you ride.

I agree!
I still have 2 and have only sucked up the front suspensin strap to keep the nose down.
Found that ski rubbers are really good if you take your time to and from the alpine.

You may want to add extra wheels to the rails to save on sliders if not already done.

Check motor mount bushings for wear and replace if needed. Not hard to do.

Have fun and enjoy the sled. There a very reliable unit.

 

[lgallant]

Love the sled. Hate the skis. They dart like a mutha F. Replaced with Mohawks and these skis work well. No darting and they float way better. Only down side is they are pricey but I have used them on my last two summits. So one more and it will be worth it.

 

[tex78]

Love the sled. Hate the skis. They dart like a mutha F. Replaced with Mohawks and these skis work well. No darting and they float way better. Only down side is they are pricey but I have used them on my last two summits. So one more and it will be worth it.

I also hate the t3 skis, lived with them fir 3 years, said screw it and put grippers on, which are close to the Mohawks