Morimoto XB LED Headlights

[Alberta Rhino]

Any one have any thoughts on these series of LED lights . Possibly interested in the replacements for 2018 GMC Sierra HD LF 544.
$ 1700.00 is to much money to spend if there junk and do not perform much better than the factory HID

 

[mclean]

I've heard nothing but good things about them for their fogs and headlights on the fords...

 

[blubbles]

I run their HID kit in my 15 GMC 2500, very happy with it, much brighter than before and seems to be one of the only kits that lasts. Amazon LED's in the fogs, with a diode to allow high beams and fogs has done me well nighttime driving for a few years now. Not 50" LED bar bright, but much better than factory lights

Never found a Morimoto product that didn't live up to the hype. Just my $0.02.

 

[kovs]

Have them in the low beam on my 15 chev and the led high beam and fogs. No shortage of light. Low beam is like high b4 upgrade. Couple years old now. Essk customs in Saskatoon is where I got.

 

[MK4TDI]

ALL the morimoto products I've used work well, I do not have much experience with their LED's besides the XB fog lights, they are fantastic.

I run their FXR bi-zenon HID on my 2015 1500, and the DS2 5.0 Bi-zenon in by 2015 3500... it's a bit more involved changing out the lense but definitely worth it in my opinion.

FastHeadlights is where I got my kit from, but that ESSK customs is very good to deal with as well, I have gotten a few ignighters from them over the years.

Running 5 years on the lights in my 1500, and a little over a year on the 3500, money very well spent if you do any amount of night driving.

https://www.fastheadlights.com/

 

[Stg2Suby]

I was researching the full Morimoto XB headlight replacements for my Ram for awhile. Only drawback I read about was the height adjustment mechanism and needing to remove the entire assembly to adjust the height (?). May have been BS but should be an easy thing to confirm before you buy.

edit: now that I think about it, I wonder if the adjuster was just in a different location than the factory housing, necessitating drilling a new hole to get at it. I ended up swapping 13+ factory projector headlights into my '12 and I had to locate and drill new holes to get at the adjuster screws. None of this may apply to Chev/GMC.

 

[iceman5689]

I installed some on my L5P. Philips head adjuster on mine. Couldn’t be simpler. Prolightz out of Ontario. Don’t think the 3 bulb kit, fogs/high/low were more then $600-700

 

[smokindave]

I have Morimoto headlights,fog lights and their tail lights on my c6 corvette and have had not a single issue,they are bright.
I wouldn’t hesitate to try any of their products.
Cheers

 

[Alberta Rhino]

So I did purchase the Morimoto XB Led headlights for the 18 GMC Sierra HD. Way better than the OEM HID by far.