Looking for someone to install wrap

[snowseeker]

Ok guys have had lots of wraps installed and my buddy that does it is away and when he gets back his away on work shift.
so I am looking for someone that has done wraps before and is good at it and will pay them cash to install mine. I have a heated garage in fort Saskatchewan.
looking to get it done ASAP. It is an arctic fx wrap going on a skidoo xm full wrap tunnel as well.
thanks in advance for any help.
Pm me or text me 780-699-9118

Darren

 

[1100]

I just seen your one of your sleds and it had a wrap on it already. Better just go for it. What's the worst that could happen.

 

[ferniesnow]

Good videos on YouTube. You can doo it!

 

[BIGHORN1]

its not that bad at all, just giver

 

[snowseeker]

Did one didn't turn out great. Better at designing them.

 

[Warhawk]

There not that bad you just need to follow 3 simple rules.
1....BEER(lots of it)
2..........................patience (lots of it)
3......................................................time (lots of it)
this took 10 hours

 

[ajb1205]

Too bad u werent closer...I have installed dozens of wraps. Biggest thing is get it clean and warm...and just take your time. A heat gun comes in handy too.

 

[snowseeker]

There not that bad you just need to follow 3 simple rules.
1....BEER(lots of it)
2..........................patience (lots of it)
3......................................................time (lots of it)
this took 10 hours

that wrap was my design on my pro but with purple, then I did it in yellow on a doo. It's a sick wrap!
looks awesome. It's on there site.

 

[snowseeker]

Too bad u werent closer...I have installed dozens of wraps. Biggest thing is get it clean and warm...and just take your time. A heat gun comes in handy too.

I have all,that just not the patience to do it.

 

[BIGHORN1]

Refer to Rule number 1, lots of beer helps with the patience

I have all,that just not the patience to do it.

that wrap was my design on my pro but with purple, then I did it in yellow on a doo. It's a sick wrap!
looks awesome. It's on there site.

 

[Shredder]

We'll Doo it in the trailer the night we get to McBride. Should be able to slap it on in 20 minutes or so. No biggie if it's not perfect.....

 

[snowseeker]

We'll Doo it in the trailer the night we get to McBride. Should be able to slap it on in 20 minutes or so. No biggie if it's not perfect.....

When have you ever known me to do something half azz?

 

[TylerG]

Plio7 hired someone last year to install his wrap on his Proclimb, maybe PM him Darren and see if he's still got that guys contact information.

 

[Bogger]

I was going to hire mine out but decided fawk it.... It was remarkably easy, I bought some rapid-tac from a sign shop here in Edmonton and you have 90 seconds to position it then just work on getting the water/air bubbles out, hair dryer works well for any rounded parts, little heat and it flexes nice...

AND... If you happen to put one on wrong you can pull it back off and it will still re-install with no issues, I had to pull one of my sections off after about 5 minutes, I re-wiped down the area, re-wet the decal and she went on no problem. Everything seems to be holding tight.

 

[Bogger]

https://www.youtube.com/watch?v=qMo2AtRCcxY

 

[snowseeker]

Found someone so I am off the hook! Lol will post pics when it's done.

 

[Shredder]

Found someone so I am off the hook! Lol will post pics when it's done.

A couple boxes of Twisted Tea and we could have had er on in 20 minutes buddy......just sayin'.


Sent from my iPad using Tapatalk

 

[Summitric]

Ya, there was no mention of twisted tea.... Jus sayin


Sent from my iPad using Tapatalk