Lift Pumps and Transmissions

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
Hi Peoples,

So I just bought a 1999 dodge 3500 5.9cummins, its all stock. I am going to upgrade the lift pump and the transmission so I can make some power with it I am going to use only in the summer to haul my camper and boat. What aftermarket parts are the ticket for this old pick-up?
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
Here it is.
cdd9ee2fe5b4d348a1b606743a92cd6f.jpg
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
Hard to beat the Fast fuel systems. Or BD diesel has some nice lift pumps. Bottom sumps are nice. Not sure of any trans guys in your area but if you drive to Edmonton area there’s a shop in Acheson that awesome at building them. His shop is call Icon or Iconic drive line.
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
I had a 98.5 24v it had the Banks big power bundle on it, it was turbo compressor, cold air intake, air intake horn, full exhaust and chip and that truck pulled! Is banks still around?
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
I had a 98.5 24v it had the Banks big power bundle on it, it was turbo compressor, cold air intake, air intake horn, full exhaust and chip and that truck pulled! Is banks still around?

I will look
 

DRD

Active VIP Member
Joined
Oct 21, 2008
Messages
2,755
Reaction score
5,457
Location
Red Deer County
BHAF
Glacier big line kit with or without stock pump relocation
RV275 injectors, cheap and pull decent
I used an Edge comp, easy to adjust power
Adjustable boost elbow
Gauges

Any more you will be sinking big money into the transmission, a decent valve body would probably help.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,771
Reaction score
20,797
Location
Salmon Arm
sold mine a few years ago, still miss it sometimes. I thought you were all about the gas dually?

any intake, BHAF is cheapest and filters well.
upgraded lift pump I used the FASS but had to replace a bad one once.
4" turbo back with hushpower muffler
edge juice w/attitude makes a bit less power than the comp but I liked having the integrated gauges and being able to set the backdowns was nice for those times you get a bit carried away on the hills.
boost elbow came with the edge box
DDP 125hp injectors made a ton of power and were pretty clean all things considered
I had a stick but the auto is a lot more forgiving with a bigger charger. I had a 60mm but was after a 62 before I sold it. Probably no more than a 64mm inducer if it's getting worked.

Trans pick your poison, tons of snake oil salesman when it comes to diesel transmissions, especially the 47re.
 

Stg2Suby

Active VIP Member
Joined
Mar 8, 2009
Messages
1,976
Reaction score
4,635
Location
Stony Plain AB
How sure are you the truck is all stock? From the photo it appears to have aftermarket dual exhaust so I'd be surprised if it wasn't otherwise tinkered with.

Watch the rust on bottom inside of the doors that's how mine started and got out of control.

They are great trucks I had an '01 for 10 years with just RV275 injectors and an Edge timing box. All I did for fuel mods was upgraded the line size to remove some restriction and periodically checked the lift pump pressure.
 

DRD

Active VIP Member
Joined
Oct 21, 2008
Messages
2,755
Reaction score
5,457
Location
Red Deer County
If it's still got the stock (original) injection pump set aside a grand if you use a wire tap box though, it will die. Mine toasted on the first big pull. Updated later pumps could handle wire tap boxes better. It will pull good with just RV275's and something like and Edge EZ though.
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Save some money for a neck and back brace or suspension seats. Worst riding trucks of all time. I almost bought one years and years ago. Even with the weight of a diesel it road like sh!t. We took it for an hour test drive and the wife and I both had a nasty headache when we gave the truck back and walked away.
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
sold mine a few years ago, still miss it sometimes. I thought you were all about the gas dually?

any intake, BHAF is cheapest and filters well.
upgraded lift pump I used the FASS but had to replace a bad one once.
4" turbo back with hushpower muffler
edge juice w/attitude makes a bit less power than the comp but I liked having the integrated gauges and being able to set the backdowns was nice for those times you get a bit carried away on the hills.
boost elbow came with the edge box
DDP 125hp injectors made a ton of power and were pretty clean all things considered
I had a stick but the auto is a lot more forgiving with a bigger charger. I had a 60mm but was after a 62 before I sold it. Probably no more than a 64mm inducer if it's getting worked.

Trans pick your poison, tons of snake oil salesman when it comes to diesel transmissions, especially the 47re.

My gas pot is great but when loaded heavy, camper and pulling boat fuel range becomes and issue unfortunately and this is where the diesel shines. This truck being a older emissions free truck is what sucked me in. The prices on new trucks is insane and I only haul the camper and boat a dozen times a year. So I will stick the camper on it and leave it there.

When I went to Whitehorse last summer I barely made fuel stops, and one day I had a terrible headwind and killed a tank of gas in 390kms!!! The gas truck haulls awesome but it is thirsty.

Thanks for the info.
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
Save some money for a neck and back brace or suspension seats. Worst riding trucks of all time. I almost bought one years and years ago. Even with the weight of a diesel it road like sh!t. We took it for an hour test drive and the wife and I both had a nasty headache when we gave the truck back and walked away.


its 2 wheel drive, it rides really nice compared to my f-350 dually
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
If it's still got the stock (original) injection pump set aside a grand if you use a wire tap box though, it will die. Mine toasted on the first big pull. Updated later pumps could handle wire tap boxes better. It will pull good with just RV275's and something like and Edge EZ though.

what is a wire tap box?
 

Clode

Active VIP Member
Joined
Jan 8, 2012
Messages
29,550
Reaction score
46,587
Location
BC
How sure are you the truck is all stock? From the photo it appears to have aftermarket dual exhaust so I'd be surprised if it wasn't otherwise tinkered with.

Watch the rust on bottom inside of the doors that's how mine started and got out of control.

They are great trucks I had an '01 for 10 years with just RV275 injectors and an Edge timing box. All I did for fuel mods was upgraded the line size to remove some restriction and periodically checked the lift pump pressure.


She is no powerhouse lol, it does have a 4" BD exhaust and it looks really new. The air cleaner is stock, lift pump stock, no boxes plugged in. The truck was on Van Island and pulled a 5th wheel. An old dude owned it. It was to the dealer for service every year of its life.
 

DRD

Active VIP Member
Joined
Oct 21, 2008
Messages
2,755
Reaction score
5,457
Location
Red Deer County
what is a wire tap box?

All the higher HP boxes like the Edge Comps etc. need to intercept the signal going to the VP44 injection pump. Unfortunately many of the 98.5 to 2000 pumps weren't as good as they could have been. When you stress them to deliver the extra fuel, they pile up. The lower HP boxes like the Edge EZ don't tap into the harness and fry the pumps. Like I mentioned, an Edge EZ and RV275 injectors makes a decent pulling combo.
 

Lund

Active VIP Member
Joined
May 4, 2013
Messages
4,247
Reaction score
11,290
Location
Vernon/Kelowna
I will need to add a leaf in the rear to handle my camper, it 4700lbs loaded up

Before i would do anything with that i would confirm the GVW. 4700lbs seems high for todays truck. My F350 has a payload of about 2,000lbs, your more then doubling it.
You cannot just add springs and call it good, it doesn't work that way. DOT goes by your GVW engineered factory spec's on the door of the truck.
 

the_real_wild1

Active VIP Member
Joined
Oct 13, 2010
Messages
6,966
Reaction score
7,389
Location
cardiff
Before i would do anything with that i would confirm the GVW. 4700lbs seems high for todays truck. My F350 has a payload of about 2,000lbs, your more then doubling it.
You cannot just add springs and call it good, it doesn't work that way. DOT goes by your GVW engineered factory spec's on the door of the truck.

2000lbs for a f350 sounds low. My last dodge was 4200. My new truck is around there too but I’d have to check again for exact numbers.
 

Lund

Active VIP Member
Joined
May 4, 2013
Messages
4,247
Reaction score
11,290
Location
Vernon/Kelowna
To figure out your pay load(carrying capacity)you have to subtract your Truck weight empty no driver or passenger from the GVW.
There are no pickups that will legally carry 4,000lbs.
my camper scales at 1750lbs, once loaded i’m borderline legal.
 
Top Bottom