Let's see the 900's!

[Mare]

Here's my RMK 900. SLP pipe can, and air box. Clutch kit, 166". Fresh top end 10 kms ago. Nothing fancy, totally insane sled... NOT FOR ME !!!! :d

 

[BIGGDAWG]

here is my 900 well 975 :d

 

[ss_badaz]

The 2005 Nine 166 track 50th running 18/39 gearing, 10/74 weights, New crank, 06 Pistons, 45 shot of NOS, WRP running boards, Skinz front & rear bumpers, Skinz Float Plate, Skinz Seat Mod, Fire N Ice air intake, Fire N Ice headlight vent intake, SLP Powder Pro Ski /with Carls Cut-Out, 08 Front Spindles, FBF Oil cable, Badaz Gill Vents, the list go's on ..... You either love em or you hate them!
I got her dialled in and running strong, pulling hard up the hills last few weeks out in the mountains.

 

[Lanko]

Here's my 900 with a few extras nothing to crazy. Now here comes the shameless plug, I hate to do it but I'm selling the old girl, it's posted in the classifieds. So if any of you 900 guys need another one or know someone who might be interested give me a buzz.

 

[06 Dragon]

Here are some of my old 06 900 Dragon.

 

[06 Dragon]

Couple more.

 

[BrightMark]

what was the deal with the 06' 900 dragons i always thought guys were just putting decal kits on stock 900, what differs from stock 900 to 900 dragon? and will you sell that sled

 

[06 Dragon]

That sled was stock, the way she looked right out of the show room. The only changes i made were the drivers, rad delete kit/ air box intake. slp pipe,y pipe and can. Already sold sorry.

 

[polarice]

Pretty much stock with the exception of skis and slp can

 

[guidoxpress]

here is my 05...dont have access to other pics right now (at work), pretty much all stock

you name it, i most likely have it on this sled, lol...been a great sled, but only cause i did the work, haha...jk..

i have a carls 975 kit to install as well.

i also have an 06 900 i am building this summer...just installed a Van Amburg Boondocker tunnel, waiting to finish up some powder coating, and i will post pics as well. considering building a turbo on it this winter or next summer for sure...on 12lbs boost using AVGAS 100LL

Pm me if you need any help, input, advice...or just to BS...always love talking sleds...

Here is my list of parts on the sled..and where you can find them if you are interested..if they are not OEM parts!

Venting
•Longtracks Edge Side Panel Vent Kit ()
•MoFlow Dash Vent Kit (Home page Mo-Flow Inc.)
•Mountain Fit Hoods, Hood Vent kit



BODY
•Black IQR Hood ()
•SPG Seat Post (Please Update Your Bookmark!)
•Custom Black Seat Cover
•SPG 09 Front Bumper (Please Update Your Bookmark!)
•09 IQ Center Console
•09 IQ Front End Conversion (FASTRAX MOTORSPORTS)
•09 OEM Skid Plate
•Custom Black Smooth Lined Tunnel (SuperLiner-Bedliner)
•Black Powder Coated Engine Support Braces (done by myself)
•Black Powder Coated Recoil Housing (done by myself)
•Black Powder Coated Better Boards ()
•Black IQR Windscreen
•Black Skinz Rear Bumper
•Black Polaris handguards with Billet mounts
•Rider Select Delete Kit (Polzinhunter on snowest)
•ProTaper Handle Bars (eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices)
•09 Dragon 90 Degree Bar Hooks
•Fastlane Hood Strap Kit ()
•Custom UHMW Side Panel “RMK 900” (Polzinhunter on snowest)
•’06 RMK 900 DRAGON “166 Track” Decals
•Pro-Armor Tether Cord
•Dzus Fastner Kit for Side Panels
•Fastrax Billet Throttle Block (FASTRAX MOTORSPORTS)
•Snowy Mountain Lefty Throttle (SNOWY MOUNTAIN WINTERSPORTS)
•RSI Hi-Power Grip Heaters (Race Shop, Inc. : Welcome the RSI online store.)
•Billet Pull Handle (eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices)
•BoonDockers Light Resistor (Enter Boondocker)
•Gripper Skis
•SLP LED Tail Light Bar (Starting Line Products)
•Custom Made Gas Rack
•CFI LED Adapter (Bluhm Enterprises Brite Lites: Xenon, LED & HID Lighting)
•PowerMadd Extended Brake Lever ()
•AMP Billet Gas Cap
•Timbersled Gauge Bracket (Timbersled Products)
•Polaris Underseat Bag

Engine
•Custom Billet Chaincase Cover (Polzinhunter on snowest)
•Mountain Fit Hoods Intake Shelf ()
•’06 Rear Motor Mounts
•CompFusion Front Motor Mounts (CompFusion on snowest)
•Custom Solid Billet Front Cross-Member
•SLP Push Arm (Starting Line Products)
•SLP Torque Arm (Starting Line Products)
•SLP Pipe (Starting Line Products)
•SLP Y-Pipe (Starting Line Products)
•SLP Billet Cylinder Head w/5000ft-up domes (Starting Line Products)
•CPI Racing Stinger Can (CPI Racing - Prepare for the Most Exciting Ride of Your Life)
•FBF Throttle/Oiler Cable (FatBoyzFrenchy on snowest)
•BoonDockers Nitrous (Enter Boondocker)
•BoonDockers Control Box (Enter Boondocker)
•HYVO 18/40 Gears
•Royal Purple ATF Chaincase Fluid
•Updated TPS Wiring Harness
•Armor Cord Heavy Duty Pull Rope (Armorcord)
•FNI Intake (www. Firenice.us)
•Black Powder Coated Belt Cover (done by myself)

Suspension
•Fox Floats Front Shocks (FOX RACING SHOX)
•Fox Float Roost Guards (FOX RACING SHOX)
•Walker Evans Rear Track Shock (Walker Evans Racing)
•RYDE FX Front Track Shock
•225lb Front Track Spring
•MMP Freedom Axle (www.Mountainmachines.us)
•MMP 9” Billet Big Wheel Kit (www.Mountainmachines.us)
•MMP 5 ½” Idler Wheels (www.Mountainmachines.us)
•ZBROZ 40” Wide A-Arms (ZBroz Racing)
•ZBROZ Black Billet Spindles (ZBroz Racing)
•ZBROZ 09 Sway Bar Bracket (ZBroz Racing)
•‘09 Sway Bar
•Custom Billet Tie-Rods (WIMPY on snowest)
•HOLZ Billet Rail Brace (Holz Racing Products || ATV - 450R || UTV - RZR RZR-S || Sled - Rev IQ RMK)
•07-up IQ Steering Boot Covers
•Ice Scratchers (SummitSeeker on snowest)
•166” Series IV Track 2.4” Paddles with all windows punch/ported

Clutching
•Team TSS-98 Secondary
•66/42.46 Twin Trax Helix
•2 Derlin Washers in Secondary
•Black/White or Red/Pink Secondary Spring
•3211115 Drive Belt
•Balanced P-85 Drive Clutch
•74g MTX Weights with 2g in outer hole
•Blue/Pink Primary Spring
•Tri-City Performance Secondary Clutch Fan Kit (no longer available)
•Black Powder Coated Primary Cover (done by myself)
•Black Powder Coated Secondary Cover (done by myself)



MISC
•Warm-up Stand (EazyMove Carts for snowmobiles and personal watercraft)
•EZ Sled Lift (EazyMove Carts for snowmobiles and personal watercraft)
•SLP Clutch Press Tool for Primary/Secondary (Starting Line Products)
•SLP Clutch Holding Tool (Starting Line Products)

Wish List
•Custom Wide running boards
•SLP Cylinder Porting with Decompression Hole Plugging
•Custom Rear Motor Mounts, front of engine Torque Arm Assembly
•Timbersled sway bar block off plate
•Anti-Stab Kit
•Anti-Rachet Drivers
•Heavy Duty Torsion Springs .377/47 degree
•Rebuilt Stator
•Updated 32mm Crankshaft
•Torque Master I Crank Modification
•ZBROZ EXIT shocks ALL the way around or Timber Sled Mtn Tamer Skid
•Black Powder Coated Skid
•KOSO Dual EGT Gauges
•Innovative AF Gauge

 

[Danbot]

Here's this years version of my 06 900 Switchback.
09 front plastic conversion, Mountain Fit vents, Compfusion engine mounts, and a whack of preventative maintenance. Bring the snow!

 

[lane3030]

my 05 900 rmk, 159". added since the pictures, pro taper handle bars, hand guards straight black side panels aluminum bumper, and gutted stinger.

 

[High Velocity]

Here's my '06. Mods include '09 plastic, Holz rear suspension and spindles, Walker Evans front shocks, Boss seat, Diamond S hood, Snow Eliminators, Sly Dog skis, SLP single with "Thing" can, VF III reeds, custom intake, updated 32mm crankshaft, Cat M-series bars, Rox 3" riser, 2Cool side panel vents, and some other weight saving mods. All together, she's about 60+ lbs lighter than stock. Fun sled, but it's soon time to part ways with her. Looking to build a pump gas turbo Pro RMK for next season.

 

[Danbot]

Here's my '06. Mods include '09 plastic, Holz rear suspension and spindles, Boss seat, Diamond S hood, Sly Dog skis, SLP single with "Thing" can, VF III reeds, Custom intake, Cat M-series bars and some other weight saving mods. All together, she's about 60+ lbs lighter than stock.

Looks great Ken! Can't wait to hook up for a ride this year. You free nov 26-28 if bc has snow?

 

[High Velocity]

I'm working that weekend. I work an 8 on - 6 off, so I only have every second weekend off. We'll definitely hook up sometime though

 

[hunt340]

It is great to see all the pics of the greatest machine ever built! I love my 05! I do have a question if someone could help me. I've heard about removing the rad and changing the air box but I have no clue when to look for items like that. If someone could give me the info it would be great. Also if there are any other good mods I should consider please post them. My sled is pretty much stock, except for the updates that were given. Thanks in advance

 

[High Velocity]

It is great to see all the pics of the greatest machine ever built! I love my 05! I do have a question if someone could help me. I've heard about removing the rad and changing the air box but I have no clue when to look for items like that. If someone could give me the info it would be great. Also if there are any other good mods I should consider please post them. My sled is pretty much stock, except for the updates that were given. Thanks in advance

hunt, check out this link and you'll get all the info you'll need for your 9.
Polaris: 900 - SnoWest Forum

 

[ss_badaz]

Off to Revy this weekend with the Nine.. This pic taken a few seasons back Boulder Mtn a few new mods since then and still running strong!

 

[RMK166]

Hey everyone new here from Oregon. Here is my recently purchased 2006 900 166 track. I was pretty leary about going with the 166 after riding only a 144 700 and let me tell you i dont think i will ever go back. After taking the sled out the first time i wasnt to happy with the sled however after looking over the sled i had realized that the old owner was just not mechanically inclined and i am pretty sure the whole reason he sold the sled were reasons caused by him.

2006 rmk 900

Mods
-2010 front end
-slp performance package
-slp powder pro skis
-slp vent covers
-running board inserts
-ice scratchers
-belly pan shield
-left hand throttle
-front radiator delete

After fixing many things wrong caused by the old owner and taking it out again this week. I absolutley love the sled. here are a few pictures just click to view larger.

 

[jeremy]

here is a couple pics from a couple years ago when I picked up to fusion 900's. no problems except for a loose motor mount. The other one my friend took got shipped to wpg, and replace with another fusion, 05 as well, bright red, just rec'd a slp intake and can. I just put 1.5" track and that 121 stands up!!!!