Catman13
Active member
2013 m800. Kill switch and tether no longer work. Took apart electrical plug where tether ties in and found nothing. Only way to shut off sled is with the key. Any suggestions?
Kill switch and tether
- Thread starter Catman13
- Start date
- Thread starter
- #3
Catman13
Active member
Yup. I think it's those ****ty little plugs you replace in the harness to install the kill switch. Have to take apart again and maybe jump across the plug with a separate plug for that circuit.
AGGRESIVEZEBRA
Active VIP Member
My 13 did the same thing last year. i unplugged tether cleaned and let dry out in the garage for a couple days put it all back together and has worked great this season so far. Im pretty sure it just needed to dry out. Good luck
- Thread starter
- #6
Catman13
Active member
Just got finished inspecting the plug. Bent the kill switch pins slightly and reinstalled. Everything is working so far. Will have to wait till I've been driving for a while.
powder dreams
Active member
mines been doing the same thing but i havent had time to take it apart yet. i figure its just a crappy connection to. just sucks having to pull the sled rate apart to get at it.
Mine was doin the exact same thing. pulled the plug from the tether apart and the side of the connection closest to where the tether hooks on the knob on the sled had some play where the wires go into that half. put it back together and ziptied the connection and it is working correctly now.
AC4life
Active member
Does anyone have any experience with the pro armour tether? I have been reading about and heard about lots of ppl having issues with the cat set up. I'm wondering whether its worth it to spend a bit more cash and go with the pro armour set up.
sled-fiend
Active VIP Member
- Joined
- Aug 7, 2008
- Messages
- 213
- Reaction score
- 215
- Location
- Victoria, British Columbia
- Website
- www.raintek.ca
I've got the proarmour on my 14, been flawless so far.
AC4life
Active member
Right on, thanks guys! Gonna order mine from OFT today and get it installed on days off. Looks like a fairly easy install. Where did you guys mount it? Im thinking brake side handle bar just inside of the hand/thumb warmer control?
Yea pretty easy. You'll need to move the fuel tank to get to the plug. Can mount it to the steering post if you don't have adjustable steering
Sent from my SM-G920W8 using Tapatalk
Similar threads
