I think I'm converted !!!

[SkunkApe]

So my mind is made up , I'm walking away from a poo and gonna ride a doo . Anything I need to know ? I'm use to holding it to bar outta the box with a bit of oil in the tank . Any info on what I need to learn about these new XMs/doo . Dos and donts?

 

[MATTIAC]

It's smart it will add extra oil for you in break in mode. Just unload and go

 

[d mills]

Dont put any oil in the tank of a etec , start fighting with LennyR and you should be all set....

 

[SkunkApe]

Should I break it in with the half throttle crap or can they handle breaking it in by how I'm gonna ride all the time ... Pinned from the start .

 

[d mills]

Should I break it in with the half throttle crap or can they handle breaking it in by how I'm gonna ride all the time ... Pinned from the start .

Mine got the throttle chopped on and off till the allen creek cabin for break in.......been to the bar ever since....lol

 

[MATTIAC]

Pin it! The computer compensates. Power will increase as you go. Like I said. It's smarter then the avg sled engine

 

[adamg]

If it's a new Doo, check track tension after 20km and be ready to tighten it. Other than that just giver.

 

[Nitrobkr]

Congrats !! Let er rip. don't hold back.

 

[GYMBRAT]

I break everything IN to the PIN.

Keep us posted on the differences you like/disslike between the 2 for chits and giggles...

 

[CUSO]

Congrats. You will like the new rig! Should be trouble free!

 

[SkunkApe]

Right on thanks!!! Definatley will be some comparing coming off my 11 pro...

 

[snopro]

Right on thanks!!! Definatley will be some comparing coming off my 11 pro...

Welcome! Fed Ex will be dropping off 12 cases of Doolaide at your address in the morning. Will someone be there to meet them?

 

[GYMBRAT]

Welcome! Fed Ex will be dropping off 12 cases of Doolaide at your address in the morning. Will someone be
there to meet them?

On my way!

 

[thegeneral]

it may take you a while to get used to the less flickable chasis and your probably going to be very tired from having to muscle this thing over on its side all day as well.

 

[maxwell]

you will quickly realize what you have been missing once you get that 16 wide flipper in some deep steep stuff

 

[jeffg463]

That's good. Baby steps. A year maybe 2 and you'll be ready for the next step, unless you're one of those slow kids like Maxwell

 

[summit1974]

welcome to the Doo nation !!!!

 

[etecheaven]

there should be no reason to hold it to the pin all day unless,

1 you ride a short track and it just dumped
2 you are a ch!t rider and don't know how to use the throttle
3 you ride a 15 wide

Other then that throttle control is your friend and that means on and off all day long which is standard break in.

Enjoy your XM, I doubt you will need to pin it all day.

 

[Slamnek]

there should be no reason to hold it to the pin all day unless,

1 you ride a short track and it just dumped
2 you are a ch!t rider and don't know how to use the throttle
3 you ride a 15 wide

Other then that throttle control is your friend and that means on and off all day long which is standard break in.



Enjoy your XM, I doubt you will need to pin it all day.

Man i can't wait untill you get a sled with a big boy track Kev!!

 

[milton]

Just remember. Brand new machine means brand new belt. Still need to break in belt.