How many miles before you had a issue?

Jesse_01

Active VIP Member
Joined
Mar 10, 2012
Messages
308
Reaction score
124
Location
Prince George
With everyone bitching about them being junk. I am just curious to how many miles everyone has put on before they had something go wrong.

I had 400miles on before voltage regulator went south. I was also running a oil pump, egt and af gauge.
 

powder junkie

Active VIP Member
Joined
Nov 18, 2008
Messages
787
Reaction score
527
Location
redwater, alberta, canada
With everyone bitching about them being junk. I am just curious to how many miles everyone has put on before they had something go wrong.

I had 400miles on before voltage regulator went south. I was also running a oil pump, egt and af gauge.


me 600+ miles not even a hiccup
buddy 13 pro 500 miles same
buddy 12 pro 900 miles same

so far and counting
 
Last edited:

SledMamma

Active VIP Member
Joined
Nov 27, 2009
Messages
2,844
Reaction score
4,441
Location
Alberta
1600kms- currently in the shop for:

1) Jack shaft bearing went KAPUTZ.
2) Randomly bogging and quitting completely.
3) Possible TPS sensor fault (not sure yet)
 

orangemaddness

Active member
Joined
Mar 7, 2011
Messages
57
Reaction score
33
Location
weyburn, sk.
2011 assault sb- bogging right out of the box changed injectors fixed problem, 2000 miles and fouling plugs every time i ride it take it in and the piston rings never seated and it was recycling the exhaust gas in the cylinder polarstar extended warranty footed the bill runs great now.
2013 pro RMK - 700 miles no problems
 

JP.

Active VIP Member
Joined
Jan 22, 2013
Messages
514
Reaction score
738
Location
Lacombe
With everyone bitching about them being junk. I am just curious to how many miles everyone has put on before they had something go wrong.

I had 400miles on before voltage regulator went south. I was also running a oil pump, egt and af gauge.



Hi Jess

600 miles on mine
Turboed since brand new
Clamp on driveshaft
Original quick drive belt
Best 2 stroke I've built
Be riding lots in march
No problems to date except little hard on clutch belts
 

rydemx

Active member
Joined
Dec 15, 2010
Messages
72
Reaction score
120
Location
Armstrong
2012 Pro , 2200 miles
primary clutch spring broke at 600miles
All bushings in the skid , steering bushings , motor mounts at 1100 miles .
After 1300 miles multiple electrical issues and intermittent bogs . Tps problems , throttle safety switch problems (now by-passed)
Full rebuild on primary clutch at 1600 miles .
Currently could use all the bushings again including motor mounts .
It does like to eat belts 300-400 miles per belt of extreme torture!
Secondary spring just got replaced at 2100 miles (long over due and made a huge difference) as well as egt sensor and tps replaced .

Engine to this day still has 120psi compression , I literally tryed to blow it up last ride in 2 feet of fresh with it wot for over 10 min straight . It runs even better now !
Even with the problems I've had these sleds rock in the trees and no other stock sled compares for boondocking
 
Last edited:

LennyR

Active VIP Member
Joined
Jun 13, 2009
Messages
3,380
Reaction score
14,335
Location
alberta
11 Pro, just sold it 3200 miles , never blew a belt, changed it at 2000 miles cause I thought I should, bought one new belt, zero motor issues, no shock issues, checked motor mounts constantly, tiny crease in tunnel, sub frame fine, bent 2 front bumpers replaced with no other damage, never bent an a arm, had Cat rear bumper whole time, had SLP pipe and PC5 , no belly pan, Camo Extreme track, tried 2 different aftermarket seats, no injector issues, no unexpected clutch issues, ran delrin washers under clutch springs, ran a 100 - 330 spring to soften initial engagement, ran MDS 68.5 weights. No issues, great sled , only ride mountains. Put in mtn trek piston kit at 3200 miles cause I thought it was prudent and the motor deserved it. Compared to other brand 800's well, win some lose some. Sold it to a buddy and he loves it.
So, my point, not all experiences are the same.
oh and this was my sled,........... Not my buddies or my cousins or an internet post I read.

Sorry, I forgot, fuel pump at about 2200 miles.
 

Zien19

Active member
Joined
Jan 21, 2013
Messages
45
Reaction score
12
Location
North East BC
2011 Pro
1730 Miles EGT Sensor
1920 Top end Squeaked Mag side piston.
Bought at 1700 so far not a good experience but now know enough about the machine to make my own opinion due to not knowing the previous owner.
Call me crazy but it’s still the best sled I have ever owned Great 3 days in Vale!!!!!!
 

JCasino

Active member
Joined
Nov 24, 2011
Messages
100
Reaction score
50
Location
Nelson
12 pro, replaced top end under warranty at 1450 miles due to nikasil flaking off cylinder, a couple bumpers (stock and aftermarket), no primary's, no TPS issues, never a bog or hiccup, no broken rear bumper, no broken a-arms, no loose motor mounts, etc. Always good fuel, stored dry, and regular maintenance. At 1900 miles now and it runs like a top. Still, trading in for a '14 as I only had two years warrantee and don't plan on owning any sled past 2-3 years.

IMO, most people on this site that say they are junk are Doo(chie).....;-)
 

Dazzler

Active VIP Member
Joined
Oct 22, 2009
Messages
939
Reaction score
2,129
Location
Cochrane Ab
Pulled the top end down on my 2011 Assault last fall at approx 3400 klm to check pistons as rumor on this site claims they are only good for maybe 2500??? Pistons were in excellent shape.... put back together with fresh pistons and now have 4100 klms on it... only issue I've had was an egt sensor at about 3700 klms and I did have some moisture in the TPS plug (sled would not go into reverse) that gave me a little grief last weekend.. a little dielectric grease and good to go.... MY 2013 Pro has just shy of 1000 klm and not a hiccup.... Have never blown a belt on either machine either, but I always change belts and clutch springs at about 2000 klm just cause....

Absolutely love the pro chassis.............
 

Littledoo10

Active member
Joined
Nov 5, 2011
Messages
66
Reaction score
13
Location
Newbrook and Edmonton Alberta
Approximately 600miles, 80ish miles boosted around 10lbs on a 13 pro, still waitn for an issue. Has the odd bog now and then but i gatta dial it in! Absolutely love this sled! And thats commin from a doo guy! Haha
 
R

Ryan Verrecchia

Guest
2012 pro rrmk had 5 tps changed just did it again and it was wireing so 6 times now since 0-2900miles
and one back shock... Shock wasn't warrenty.
 

Jesse_01

Active VIP Member
Joined
Mar 10, 2012
Messages
308
Reaction score
124
Location
Prince George
2012 pro rrmk had 5 tps changed just did it again and it was wireing so 6 times now since 0-2900miles
and one back shock... Shock wasn't warrenty.

I would start to think there is more behind it needing all those TPS sensors. Not saying the dealer is scamming warranty. But makes you wonder.
 
  • Like
Reactions: cs5

big09dragon

Member
Joined
Nov 17, 2009
Messages
21
Reaction score
0
Location
Iowa
2011 800 assault. No problem until 1300 miles, DET mode started kicking in if I pinned the throtle. I changed the fuel pump and its fine now.
 

timbo

Active VIP Member
Joined
Dec 18, 2006
Messages
1,088
Reaction score
386
Location
edmonton
2013 Pro 800 675 miles,took it in for the service bulletin on the quick drive.Found out the jackshaft was hooped,bearing was still intact and belt looked new.I had the jingling noise for about 25 miles and then found the top bolt was loose,guess the damage was done already.They're going to replace the jackshaft both bearings,top gear,belt and new bolts.Before this the sled worked great.
 

chrishew

Active VIP Member
Joined
May 5, 2009
Messages
162
Reaction score
146
Location
Calgary
12 Pro. Has a PA 13.6 head, HPS can, Fire n Ice intake, and Boss NOS kit. 230 miles before me and 800 miles total now. Been great so far. Blew the original belt last ride. I'm changing the steering bushings and cut some steel plates to cap them with and replace the aluminum ones for the steering post, hopefully will help with some of the steering post flex. Compression test a couple of days ago showed 136 psi both cylinders at 3000' elevation.
 
Top Bottom