help

[grizzguy]

Hey people thought I would ask if anyone has had this issue with there quad? I have a 08 700 grizzly and I cant seem to start it in any gear but park ? I couldnt start it in neutral either until I changed my linkage. Once I have it in high or low I cant seem to start it at all. I bought a sensor switch by my brake and it still wont start. As soon as I put it in park or neutral it fires up right away. Any thoughts?

Thanks

 

[medler]

Try putting it in gear and pull the left hand brake,(REAR BRAKE) that should work...

Welcome to snow and mud

 

[grizzguy]

Hey,

Yaa I have tried that as well, Both brakes are pull and also the foot brake and still nothing !!

 

[medler]

Could be a linkage adjustment issue.I had to adjust mine...but i didnt have that problem you had

 

[AreWeThereYet]

See if your brake lights are working

 

[grizzguy]

I checked that too and when I put the brakes on back light doesnt do anything but stay as if it was just sitting there !!

 

[Mare]

Welcome to S&M. :d

 

[AreWeThereYet]

I checked that too and when I put the brakes on back light doesnt do anything but stay as if it was just sitting there !!

The brake switch sends a signal to the brake light, a splice wire goes back to the ECU as well. I would check the wiring from the switch to the splice

 

[ferniesnow]

Welcome and enjoy the information, comraderie and banter.....

PS good luck on your first issue.....someone will help you out of the jam!

 

[Philster]

To Snow and Mud.Com
Check out My Video.Click on the link.
[media]http://www.youtube.com/watch?v=aeqqbJGMWyM[/media]
You might see some familiar Sledders.