G4 gauge and manual question

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,550
Reaction score
1,795
Location
Alaska
I don't know about the rest of you but that damn thumb heater on the G4 Summits gets way too hot for my liking so I did some exploring with the gauge and saw that it has a setting for the thumb warmer so I turned it all the way down and that made a huge difference, has anyone else done this to their sled? Also, I need an owners manual for my sled as my preowned 2021 didn't have one and the previous owner isn't being to helpful with the one that came with this sled, can i get one without having to buy one?
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,604
Reaction score
18,824
Location
Edson,Alberta
I don't know about the rest of you but that damn thumb heater on the G4 Summits gets way too hot for my liking so I did some exploring with the gauge and saw that it has a setting for the thumb warmer so I turned it all the way down and that made a huge difference, has anyone else done this to their sled? Also, I need an owners manual for my sled as my preowned 2021 didn't have one and the previous owner isn't being to helpful with the one that came with this sled, can i get one without having to buy one?

If you have a 2021 that can be adjusted in the new gauge. Older sleds its a trip to the dealer.
 

bobsledder

Active VIP Member
Joined
Jan 11, 2009
Messages
2,830
Reaction score
6,126
Location
Not Sure
Curious to know what the dealer can do with it.

They can change the percentage going to thumb warmer or handgrips is my understanding. It is really dumb that it isn't user adjustable for your preference. Everyone has friendly doo dealer next door.

Almost as useless as the gauge itself. You get a lot for 20K and up
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,317
Reaction score
12,801
Location
Edmonton
I thought I was crazy to think my cold thumb wasn't as warm as my burning hands.... I need to get that changed.
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,550
Reaction score
1,795
Location
Alaska
How are you guys attaching your grips to the bars so they don't slide off? I put a set of the RSI 7" rubber grips on and they are slowly sliding off the bars and I have to keep pushing them back on. Might have to go back to the Doo stock grips.
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,317
Reaction score
12,801
Location
Edmonton
MX guys wire em on with stainless tie wire. Turcotte has a video of doing his this season.
 

snoflake

Active VIP Member
Joined
Oct 15, 2008
Messages
1,538
Reaction score
5,507
Location
Red Deer
Did you use hairspray to put them on? It helps when sliding them on, then sets up and works as an adhesion.
 

AkNomad

Active VIP Member
Joined
Feb 2, 2010
Messages
1,550
Reaction score
1,795
Location
Alaska
Did you use hairspray to put them on? It helps when sliding them on, then sets up and works as an adhesion.
I did but it's not holding like it has in the past. I picked up a set of the Doo Deep Snow Grips and will be putting them on later today using the air pressure method.
 
Last edited:

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,317
Reaction score
12,801
Location
Edmonton
The hairspray was much higher quality the last time SnoFlake used it..... He probably had some real Twisted Sister spray left over lol
 
Top Bottom