Nov 20, 2018 #21 markoo Active VIP Member Joined Nov 9, 2008 Messages 421 Reaction score 361 Location southern Alberta S module is bent.
Nov 20, 2018 Thread starter #22 LBZ Active VIP Member Joined Apr 16, 2010 Messages 3,068 Reaction score 3,651 Location Central Alberta Caper11 said: Check the spindle and the lower a-arms. Check the arms with a straight edge. Click to expand... I’m going to do this tonight after work.
Caper11 said: Check the spindle and the lower a-arms. Check the arms with a straight edge. Click to expand... I’m going to do this tonight after work.
Nov 26, 2018 #23 B butthead Active member Joined Mar 8, 2008 Messages 65 Reaction score 40 Location bc id put a straight edge on this part and see if its bend doesnt take much Attachments faa2136261c881538b0885247c49a706.jpg 98.5 KB · Views: 246
Mar 29, 2020 #24 C chris155 New member Joined Nov 27, 2013 Messages 3 Reaction score 0 Location Coast Did you figure out what was bent? I'm in the same boat..
