Frequency List/CHIRP Image for Sledding & Baofeng Radios

Vance Matheson

Active VIP Member
Joined
Oct 30, 2012
Messages
1,488
Reaction score
1,150
Location
edmonton
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

Did you buy the remote speaker/mic for your radios?.
 
Last edited:

wakeandsnow

Active member
Joined
Aug 13, 2012
Messages
68
Reaction score
24
Location
Invermere
Ya the puxing uses kenwood stuff. It's super loud and really clear. I have speaker mics for my rinos too but they are low quality for sure. Like the tracking feature of rinos but love the volume and the range of the Chinese radios.


Sent from my iPhone using Tapatalk
 

wakeandsnow

Active member
Joined
Aug 13, 2012
Messages
68
Reaction score
24
Location
Invermere
where did you pull all your channel info from for your CSV file? I would like to add some stuff to it, but i can't find info as detailed as you've provided.
 

Vance Matheson

Active VIP Member
Joined
Oct 30, 2012
Messages
1,488
Reaction score
1,150
Location
edmonton
The file was put together by another member on this site. Ive had it for awhile now.

Sent from my LG-H812 using Tapatalk
 

Vance Matheson

Active VIP Member
Joined
Oct 30, 2012
Messages
1,488
Reaction score
1,150
Location
edmonton
The very first post in this thread is very useful.

Sent from my LG-H812 using Tapatalk
 

wakeandsnow

Active member
Joined
Aug 13, 2012
Messages
68
Reaction score
24
Location
Invermere
yea I read through it but the link is broken for the file. I'd like to know where he gathered all the detailed info and add a few more channels for myself locally.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Finally figured out yesterday that my Avi beacon was keying my boefeng.
Not sure if it was interfering with my beacon broadcast or not......


Sent from my Nexus 6 using Tapatalk
 

crashidy

Active VIP Member
Joined
Feb 11, 2011
Messages
380
Reaction score
588
Location
canmore, alberta
Frequency List/CHIRP Image for Sledding & Baofeng Radios

Yes it will. Beacons must be at least 30cm away from radio. Even cell phones will cause intermittent issues. If you have your radio on and your beacon slides towards your radio it is possible to get static. There are several good research studies of the showing the interference electronics can have.

Sent from my SM-G930W8 using Tapatalk
 
Last edited by a moderator:

wakeandsnow

Active member
Joined
Aug 13, 2012
Messages
68
Reaction score
24
Location
Invermere
When we took our last avalanche course our instructor took us to a vacant lot close to high voltage hydro lines and let us turn our beacons on to try and locate one another. Not an easy task. Just another reason for the radio to be in your pack and a shoulder mic to be used.
 
  • Like
Reactions: RGM

Phat Cat

Active VIP Member
Joined
Oct 15, 2008
Messages
286
Reaction score
288
Location
Lacombe, Alberta
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

Guys I was one of them who made a csv file for Chirp. If you want it I can send it to you via email. Also I found a mistake on my csv file that you will want to fix if I sent you the file. Sorry. The mistake is in the frequency for RR-4. The frequency should be 150.185 I found all the frequencies on https://www.radioreference.com or good old Google. I just bought some more Baofeng GT-3TP radios. They transmit 8 watts on high setting. They worked great for me last year. I am using the smaller shoulder mic and it works great. I put my radio in my back pack. I rode all day in rain and wet snow last year with the mic on my shoulder. I thought it would be wrecked for sure. I was surprised at the end of the day it was working just fine.

Sent from my SM-T800 using Tapatalk
 
Last edited:

wakeandsnow

Active member
Joined
Aug 13, 2012
Messages
68
Reaction score
24
Location
Invermere
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

Thanks for putting together that list, it really saves a lot of time programming each individual channel.
 

crashidy

Active VIP Member
Joined
Feb 11, 2011
Messages
380
Reaction score
588
Location
canmore, alberta
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

any one know which RR channels are primarily in use around golden, revy, sicamous? I can't seem to find an accurate map. Just trying to eliminate the amount of channels stored on the radio. I believe Sicamous area is 8 or 9? I will laminate the frequencies so I can type them in but I would like to not have to do that all the time.
 

skegpro

Active VIP Member
Joined
May 11, 2009
Messages
9,930
Reaction score
21,329
Location
In them hills.
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

any one know which RR channels are primarily in use around golden, revy, sicamous? I can't seem to find an accurate map. Just trying to eliminate the amount of channels stored on the radio. I believe Sicamous area is 8 or 9? I will laminate the frequencies so I can type them in but I would like to not have to do that all the time.
They are all used for the most part, there are only 35 channels and there is over 100 memory locations why wouldn't you just load them all instead of messing around on the road?
 
  • Like
Reactions: RGM

wakeandsnow

Active member
Joined
Aug 13, 2012
Messages
68
Reaction score
24
Location
Invermere
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

all i can find is a map close to the lower mainland.



anybody have any luck with finding anything closer to the rockies?
 
Last edited:

Zrock

Active VIP Member
Joined
Aug 26, 2014
Messages
604
Reaction score
920
Location
BC
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

programming in on the fly will get old quick. I don't know if your area is like mine but we have a few RR that change channels 2 or 3 times before you get to your destination. If you accidentally program a chan in wrong your going to be flying blind. This is one of the reasons they frown on programming radios on the fly
 
Joined
Oct 31, 2010
Messages
7
Reaction score
6
Location
Quesnel
Re: Frequency List/CHIRP Image for Sledding & Baofeng Radios

I programed my radio and I can hear others but they cant hear me. What should the ctcss setting be at? I have all the RR channels programed in but worried the squelch numbers are wrong or something? anyone have a complete list for chirp program?
 

Zrock

Active VIP Member
Joined
Aug 26, 2014
Messages
604
Reaction score
920
Location
BC
Did u program the TX side?

Sent from my SM-G903W using Tapatalk
 

crashidy

Active VIP Member
Joined
Feb 11, 2011
Messages
380
Reaction score
588
Location
canmore, alberta
Make sure your r-ctcs and t-ctcs are "off" if trying to use the RR channels

Sent from my SM-G930W8 using Tapatalk
 
Top Bottom