? for the guys who premix

Dr. Meatman

Active VIP Member
Joined
Sep 8, 2008
Messages
2,020
Reaction score
0
Location
iowa
Well I did the oil injection delete and it freed up a LOT of room under the hood and lost bout 5-6 lbs now the question is do you guys run the stock fuel pump with a block off where the oil goes into or do you run a different fuel pump and not worry about it. If so which pump do you run.

doc
 

Haggis

Active VIP Member
Joined
Jan 14, 2008
Messages
671
Reaction score
18
Location
Sherwood Park
Stock pump with a block off also - are you running a lightweight bottle with lines to the bearings?
 

Dr. Meatman

Active VIP Member
Joined
Sep 8, 2008
Messages
2,020
Reaction score
0
Location
iowa
nope speedwerx did it for me and they drilled the case....they said i wont have any problems and was garaunteed by jeremy so we'll see how that works
 

green momba

Active member
Joined
Apr 5, 2008
Messages
59
Reaction score
0
Location
mannville a.b.
I have a small clear tube about 4" off the oil port on my engine, fill with oil once a year and yes your case has to be drilled. on doo's anyways.
 

climbin

Active member
Joined
Oct 22, 2008
Messages
108
Reaction score
36
Location
Cochrane Alberta
Usually all you have to do is drill or port the cases to lubricate the main bearings. On some makes, like a cat, you should grease the oil pump drive before you cap it. Some guys even put a grease nipple on it and give it a shot once or twice a year.
 
Top Bottom