Fishing shack

SHREK1

Active VIP Member
Joined
Nov 12, 2008
Messages
2,302
Reaction score
3,338
Location
Sturgeon County
Got it started, bit of a wood butcher but like building so few adjustments and should be good. Strated of making sure its square

28721A21-BD15-4C57-A1F9-C5A6F9A5CB0C.jpeg
 

2kDoo

Active VIP Member
Joined
Jul 23, 2012
Messages
2,520
Reaction score
4,728
Location
s
Right on !
Where ya planning to keep er?
lac st anne? i see tinnes out there
 

SHREK1

Active VIP Member
Joined
Nov 12, 2008
Messages
2,302
Reaction score
3,338
Location
Sturgeon County
Not sure yet, was going to strap with plywood then fiberglass, of strap with aluminum then uhmw
 

SHREK1

Active VIP Member
Joined
Nov 12, 2008
Messages
2,302
Reaction score
3,338
Location
Sturgeon County
Ya i have to get my shop done, i have a few projects on the go, just been lazy.
Gantry can pick 2000lbs in the center, will put a little electric hoist on it
 

SHREK1

Active VIP Member
Joined
Nov 12, 2008
Messages
2,302
Reaction score
3,338
Location
Sturgeon County
Lol, its getting close

got the floor spray foamed and now sheeting with 3/8 plywood, should be ready to flip soon
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
Sweet! I always wanted a nice ice fishing shack. You need to put something on the side and bottom of the runners. Bare wood soaks the water in and it will free in hard enough you’ll rip the wood apart getting it out.
 

Bogger

Bogger of the GBCA
Joined
Feb 21, 2007
Messages
24,426
Reaction score
18,506
Location
Down by the Bay
Seeing as I live on the lake it would make sense for me to build something like this as well...... but I'm lazy
 

Eagle

Active VIP Member
Joined
Dec 29, 2009
Messages
214
Reaction score
828
Location
Slave Lake
Looking good! I live in Slave and something like that you can rent it out when your not using it. Just a thought. Probably $ 200 plus a day. Cheers
 

SHREK1

Active VIP Member
Joined
Nov 12, 2008
Messages
2,302
Reaction score
3,338
Location
Sturgeon County
Bottom of the floor complete, little caulking then going to seal with fiberglass resin. Then finish off the skis

2E981800-3A96-4E38-9A45-FFA20B72A757.jpeg
 

SHREK1

Active VIP Member
Joined
Nov 12, 2008
Messages
2,302
Reaction score
3,338
Location
Sturgeon County
Second coat done, looks shinny so should keep the water out. Now the skis and front and rear pans. Stove showed up today so anxious to get er flipped
 

beerwolf

Active VIP Member
Joined
May 3, 2012
Messages
454
Reaction score
527
Location
BC
Very cool project!
Where did you find a 900 expedition!!?? 0 here in BC.
 
Top Bottom