Door seal replacement

prairieguy

Active member
Joined
Apr 8, 2008
Messages
45
Reaction score
21
Location
Saskatchewan
What is the best replacement door seals out there? Some guys are saying garage door rubber next guy says foam but the foam that was on the trailer when I bought it hasn’t lasted very well. Would love to find out what trails west uses on their new trailer but can’t find any info.


d5719900112877116fac1e15691faad6.jpg



Sent from my iPhone using Tapatalk
 

Summitric

SUPER COOL MOD & Supporting Vendor
Moderator
Joined
Oct 21, 2006
Messages
48,082
Reaction score
32,189
Location
Edmonton/Sherwood Park
Website
www.bumpertobumper.ca
I would scrape some of the rust off the surfaces and then paint some "Rust Converter" around the door and trailer mating surfaces(you have lots of rust building up). Use the foam strips like you have and then carry a can of silicone spray, and spray the foam seals quite often(especially after washing or heavy use)... they will never freeze or stick, with the silicone spray on them. Will last for years ;)
 

MP Kid

Active VIP Member
Joined
Dec 20, 2010
Messages
3,289
Reaction score
4,548
Location
East of Calgary
I would say that amount of rust should have a light blasting to cleanse the surface…
Soda blasting works great…

Trailers used in these types of conditions are difficult to keep clean.
 

prairieguy

Active member
Joined
Apr 8, 2008
Messages
45
Reaction score
21
Location
Saskatchewan
I stripped all the rust off front door and painted the bare metal but used up all the foam I had and just wondering if I should buy normal foam again or something different.


Sent from my iPhone using Tapatalk
 

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,896
Reaction score
10,284
Location
Cold Lake, AB
The hollow half round foam stuff seems to work best. Get the surface as clean as possible, and use a bit of heat to really set the adhesive. Don't overdo the heat though. I used the same stuff I use on the tailgate of my truck, and it holds up pretty well.

As mentioned above, some silicone lube applied often prevents the seal from freezing and pulling off. Canadian Tire sells it for $9 a can.
 

smokinD

Active VIP Member
Joined
Jun 1, 2011
Messages
4,366
Reaction score
19,643
Location
Freedom, Ab
I have some of the caliber edge glides coming in as well. I'm going to give them a try. I figure it should keep the snow and ice out when loading or sweeping out the trailer.

View attachment 279838

I assume those fold up when the door is folded correct? If so i would like to purchase some of those for my trailer, like that design looks pretty slick. Any link for these available or just google them?
 

Dawizman

Active VIP Member
Joined
Feb 24, 2014
Messages
2,896
Reaction score
10,284
Location
Cold Lake, AB
I assume those fold up when the door is folded correct? If so i would like to purchase some of those for my trailer, like that design looks pretty slick. Any link for these available or just google them?
Yes, they are hinged. Caliber edge glides is what they're called. They make a similar product to superglides as well. Amazon has them, as do many other shops. I ordered them through my buddies marine and offroad shop. I also got a set for the end of the ramp to help the skis get up and over easier - particularly when backing sleds up like I do.
1000009595.jpg
 

smokinD

Active VIP Member
Joined
Jun 1, 2011
Messages
4,366
Reaction score
19,643
Location
Freedom, Ab
Yes, they are hinged. Caliber edge glides is what they're called. They make a similar product to superglides as well. Amazon has them, as do many other shops. I ordered them through my buddies marine and offroad shop. I also got a set for the end of the ramp to help the skis get up and over easier - particularly when backing sleds up like I do.View attachment 279841
Very nice, i have now researched these and they look very good. Think i will order the door sections and the edge glides as well. I do have a ground transition piece but like the glide transition style, might not need the door glides going in but wth might as well get them as well can't hurt. Just gotta figure out how many sections i need for the ramp door now.
 
Top Bottom