Doo oil cap

sketch96

Active VIP Member
Joined
Dec 30, 2009
Messages
242
Reaction score
128
Location
prince george
I bought the doo oil cap for my 2013 just to be on the safe side. BUT when i put my motor back in my sled and went to bleed the pump i barely had any oil running out of the bleed orfice. I cracked the cap on the oil tank and all of a sudden i had alot more oil running out. It was definitely holding vacumn. Not sure just hiw small the vent is in these caps but it was holding back the oil flow quite a bit. Not sure if anyone has really checked it this way before but i am going to buy the passo cap with vent line so that there is no vacumn at all. I want to know my oil pump is getting unrestricted supply to it

FYI
 

Ol' Sarge

Active member
Joined
Jun 17, 2013
Messages
75
Reaction score
176
Location
AB
I bought the doo oil cap for my 2013 just to be on the safe side. BUT when i put my motor back in my sled and went to bleed the pump i barely had any oil running out of the bleed orfice. I cracked the cap on the oil tank and all of a sudden i had alot more oil running out. It was definitely holding vacumn. Not sure just hiw small the vent is in these caps but it was holding back the oil flow quite a bit. Not sure if anyone has really checked it this way before but i am going to buy the passo cap with vent line so that there is no vacumn at all. I want to know my oil pump is getting unrestricted supply to it

FYI
Which Doo cap do you have? 519000273 is vented. 519000194 is not. The Paaso cap is a good solution but $. I've also seen guys put in a hose barb in the highest part of the tank with a check valve in the line.
 
Last edited:

gdhillon

Active VIP Member
Joined
Sep 27, 2013
Messages
1,584
Reaction score
1,137
Location
Prince George
Which Doo cap do you have? 519000273 is vented. 519000194 is not. The Paaso cap is a good solution but $. I've also seen guys put in a hose barb in the highest part of the tank with a check valve in the line.

Which one is for a 14/15 xm?
 

knocksum

Active member
Joined
Feb 8, 2008
Messages
124
Reaction score
127
Location
Calgary
You guys are crazy. Drill your cap and install a 90 degree fitting. Attach a hose and run it to the coolant and add a small loop. Maybe 7 dollars.
 

knocksum

Active member
Joined
Feb 8, 2008
Messages
124
Reaction score
127
Location
Calgary
Hang the hose on the coolant/chain case side. When you dump the sled the hose is high enough that the oil will not run out. Also works when rolling over.
 

gdhillon

Active VIP Member
Joined
Sep 27, 2013
Messages
1,584
Reaction score
1,137
Location
Prince George
how do you tell if its vented? I just took a look at mine and it doesn't have a # on it just says xps
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,785
Reaction score
8,085
Location
Calgary/Nelson
You guys are crazy. Drill your cap and install a 90 degree fitting. Attach a hose and run it to the coolant and add a small loop. Maybe 7 dollars.

One better is to install a fuel filter on the hose as it sucks air well but oil moves very slowly through it. buys a bunch of time if sled is up side down.
 

2Quickrides

Active VIP Member
Joined
Nov 12, 2012
Messages
295
Reaction score
322
Location
Sherwood Forest
On a note on these caps, with the Poo cap installed and everything stock, I was averaging ~45-50:1 depending on riding and conditions.
After this weekend with the Doo cap and going to 2.25 gearing being the only changes, it is sitting around 25-30:1. That was just doing the around way of measuring. I'll keep an eye on it and do some accurate measurements to see if it stays around that ratio.
 

ken.gee

Active member
Joined
Mar 5, 2014
Messages
43
Reaction score
10
Location
Fort McMurray
You can also melt a pin hole in your stock cap. There is a YouTube video on it, works well.

Sent from my SM-G900W8 using Tapatalk
It's the second time I hear of this video...and searched seemingly every possible tag combination on YouTube with no luck lol. Would you happen to have a link or video title?

Sent from my SM-G900W8 using Tapatalk
 
Top Bottom