Doo clutches

[sledneck_03]

2014 freeride

Seen this on facebook. Says he never opened side panel since low elevation kit install at new.

1300km and same belt. Belt looks good and it drives fine.

Nothing is or looks to be stuck in belt.

Mind blowing.

 

[Rotax_Kid]

Where's his tool kit? not first time I've seen this.

 

[Absledder]

how would he not hear something happening? or possibly even feel it for that matter lol

 

[sledneck_03]

Where's his tool kit? not first time I've seen this.

I see guys are telling him theres a big topic on doo talk about the tools falling out and that happening

 

[team dirt]

I see guys are telling him theres a big topic on doo talk about the tools falling out and that happening

Ya I leave my tools in the glove box. Don't trust the plastic clips to hold that wrench in there.

 

[ferniesnow]

It seems like every year there is someone bit by "the old tools dropping out of the CVT"........

 

[suzuki_ryder]

That happened with mine but it looked like the rear motor mount bolt fell out and got sucked into the clutches. I pulled the clutches off and got them machined by Tom at Motts.


Sent from my iPhone

 

[Limbo]

I came very close to this happening to mine when one of the bolts holding the helix in the secondary snapped, a couple marks on the outer rim of the primary but nothing on the faces. Last week a friend had his primary grenade when a spare plug got loose, make sure everything inside your panels cannot move, consider other means of storage for anything small.

 

[Rjjtcross8]

Yikes looks like it took a good beating

 

[NoBrakes!]

The tools were taken out of their holders and put in the glove box and this was explained to me when I bought new, its something I like to pass on when I see a panel open

 

[vodoo103]

a $5 pencil case from Wally-world makes a good bag for the stock tools.

 

[stormtrooper]

a $5 pencil case from Wally-world makes a good bag for the stock tools.

Or an old first aid kit.

 

[FatGuy]

Lol had this on a 09 Xp. The bolts came out of the torque stopper down in behind the primary. Chit happens

 

[takethebounce]

I know someone who found a spanner wrench after owning the sled for quite some time. Rolled it out of the creek and heard something. I said something is in there. Rolled it a few times, out pops this spanner wrench. Looks like a Doo one. Must have been in there since it was built!




Sent from my iPhone using Tapatalk

 

[tex78]

I know someone who found a spanner wrench after owning the sled for quite some time. Rolled it out of the creek and heard something. I said something is in there. Rolled it a few times, out pops this spanner wrench. Looks like a Doo one. Must have been in there since it was built!




Sent from my iPhone using Tapatalk

And the look on his face was priceless too



Oh and it wasn't a factory tool kit wrench either

 

[takethebounce]

No it was a shop one.

It could have really caused some damage.


Sent from my iPhone using Tapatalk